Manual Eagle FishEasy 240 Fishfinder (page 26 of 92) (English)

469135

Zoom out

Zoom in

1/92

For example, some (but not all) manufacturers use a layer of fiberglass,

then a core of balsa wood, finishing with an outer layer of fiberglass.

Removing the inner layer of fiberglass and the balsa wood core exposes

the outer layer of fiberglass. The transducer can then be epoxied di-

rectly to the outer layer of fiberglass. After the epoxy cures for 24

hours, fill the remaining space with polyester resin. When the job is

finished, the hull is watertight and structurally sound. Remember, the

sonar signal must pass through solid fiberglass. Any air bubbles in the

fiberglass or the epoxy will reduce or eliminate the sonar signals.

Testing Determines Best Location

Ideally, the shoot-thru transducer should be installed as close to the

transom as possible, close to the centerline. This will give you the best

performance during high speed maneuvers.

Shoot-thru-hull transducer locations for

high speed or trolling speed operation.

1. Anchor the boat in about 30 feet of water. Add a little water to the sump

of the boat. Plug the transducer into the sonar unit, turn it on, then hold

the transducer over the side of the boat in the water. Adjust the sensitiv-

ity and range controls until a second bottom echo is seen on the display.

(You'll need to turn off Auto Sensitivity, Auto Depth Range and ASP.

Try a range setting that is two to three times the water depth. The harder

Transducer location (trolling speed)

Transducer location (high speed)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Eagle FishEasy 240 Fishfinder in the language / languages: English as an attachment in your email.

The manual is 2,93 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Eagle FishEasy 240 Fishfinder Manual

Product: