Manual Eagle CUDA 300 Fishfinder (page 25 of 100) (English, French)

469108

Zoom out

Zoom in

1/100

To mount the sonar, slide the unit onto the bracket from above (left).

To adjust the view, press and release spring-loaded ratchets while tilt-

ing the unit (right).

Portable Transducer Assembly

Make sure there is one washer on each side of the transducer, inside the

bracket. Slide the other washer over the end of the bolt and screw on the nut.

Screw the suction cup onto the bracket

using the supplied screw and flat

washer. Tie the nylon cord through the

hole in the top of the bracket. When

using the transducer, tie the other end

of the nylon cord to the boat. This will

help prevent losing the transducer if it

comes off. Clean the chosen area of

the hull before attaching the suc-

tion cup. Locate the transducer on

the hull as shown in the following

figure. Don't let the bracket extend

below the hull, because water pres-

sure against it can cause the suction

cup to come off at speed.

Ratchet

Hull

Portable transducer installed on

boat transom.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Eagle CUDA 300 Fishfinder in the language / languages: English, French as an attachment in your email.

The manual is 3,15 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Eagle CUDA 300 Fishfinder Manual

Product: