Manual Eagle CUDA 300 Fishfinder (page 19 of 100) (English, French)

469108

Zoom out

Zoom in

1/100

Power Connections (permanent mount only)

The unit works from a 12-volt battery system. You can attach the

power cable to your boat's accessory or power buss (or directly to the

battery). If you use an accessory buss but have problems with electrical

interference, attach the power cable directly to the battery. If the cable

is not long enough, splice #18 gauge wire onto it.

CAUTION:

When using

the unit in a saltwater environment, we strongly rec-

ommend that you shut off the power supply to the power cable

when the unit is not in use. When the unit is turned off but still

connected to a power supply, electrolysis can occur in the power ca-

ble plug. This may result in corrosion of the plug body along with

the electrical contacts in the cable and the unit's power socket.

In saltwater environments we recommend you connect the power

cable to the auxiliary power switch included in most boat designs.

If that results in electrical interference, or if such a switch is not

available, we recommend connecting direct to the battery and in-

stalling an inline switch. This will let you shut off power to the

power cable when the unit is not in use. When you are not using

the unit, you should always shut off power to the power cable, es-

pecially when the power cable is disconnected from the unit.

If possible, keep the power cable away from other boat wiring, espe-

cially the engine's wires. This will provide the best isolation from elec-

trical noise. The power cable has two wires, red and black. Red is the

positive lead, black is negative or ground. Make sure to attach the in-

line fuse holder to the red lead as close to the power source as possible.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Eagle CUDA 300 Fishfinder in the language / languages: English, French as an attachment in your email.

The manual is 3,15 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Eagle CUDA 300 Fishfinder Manual

Product: