Manual Eagle CUDA 300 Fishfinder (page 11 of 100) (English, French)

469108

Zoom out

Zoom in

1/100

The following instructions sometimes vary depending on the mounting

bracket that came with your transducer. Single-frequency Skimmers come

with a one-piece stainless steel bracket, while dual-frequency Skimmers

come with a two-piece plastic mounting bracket. Use the set of instruc-

tions that fits your model.

1. Assembling the bracket.

A. One-piece bracket: Press the two small plastic ratchets into the

sides of the metal bracket as shown in the following illustration. Notice

there are letters molded into each ratchet. Place each ratchet into the

bracket with the letter "A" aligned with the dot stamped into the metal

bracket. This position sets the transducer's coarse angle adjustment for a

14° transom. Most outboard and stern-drive transoms have a 14° angle.

Align plastic ratchets in bracket.

B. Two-piece bracket: Locate the four plastic ratchets in the trans-

ducer's hardware package. Press two ratchets into the sides of the plas-

tic bracket and two on either side of the transducer as shown in the fol-

lowing illustrations. Notice there are letters molded into each ratchet.

Place the ratchets into the bracket with the letter "A" aligned with the

alignment mark molded into the bracket. Place the ratchets onto the

transducer with the letter "A" aligned with the 12 o'clock position on

the transducer stem. These positions set the transducer's coarse angle

adjustment for a 14° transom. Most outboard and stern-drive transoms

have a 14° angle.

Dot

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Eagle CUDA 300 Fishfinder in the language / languages: English, French as an attachment in your email.

The manual is 3,15 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Eagle CUDA 300 Fishfinder Manual

Product: