Manual Eagle Cuda 242 Fishfinder (page 8 of 72) (English)

469083

Zoom out

Zoom in

1/72

Transducer Installation

Preparations

The following shows the recommended sequence for installing the

transducer:

CAUTION:

You should read over this entire installation section before drill-

ing any holes in your vehicle or vessel!

1. Determine the approximate location for the sonar unit, so you can

plan how and where to route the cables for the transducer and power.

This will help you make sure you have enough cable length for the de-

sired configuration.

2. Determine the approximate location for the transducer and its cable

route.

3. Determine the location of your battery or other power connection,

along with the power cable route.

4. Install the transducer and route the transducer cable to the sonar

unit.

5. Route the power cable from the unit's location to an appropriate

power source and connect it there.

6. Connect the transducer/power cable to the unit and mount the sonar

unit on the bracket.

Installation

These instructions will help you install your Skimmer



transducer on a

transom, on a trolling motor or inside a hull. Please read all instructions

before proceeding with any installation. Your Skimmer transducer typi-

cally comes packaged with a one-piece stainless steel bracket for mount-

ing it to the transom of your boat. The trolling motor mount uses a one-

piece plastic bracket with an adjustable strap.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Eagle Cuda 242 Fishfinder in the language / languages: English as an attachment in your email.

The manual is 7,91 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Eagle Cuda 242 Fishfinder Manual

Product: