Manual Eagle CUDA 168 Portable Fishfinder (page 18 of 64) (English)

469126

Zoom out

Zoom in

1/64

SHOOT-THRU-HULL PREPARATION

The transducer installation inside a fiberglass hull must be in an area

that does not have air bubbles in the resin or separated fiberglass

layers. The sonar signal must pass through solid fiberglass. A

successful transducer installation can be made on hulls with flotation

materials (such as plywood, balsa wood or foam) between layers of

fiberglass if the material is removed from the chosen area.

Epoxy the transducer to a solid portion of the hull.

For example, some (but not all) manufacturers use a layer of fiberglass,

then a core of balsa wood, finishing with an outer layer of fiberglass.

Removing the inner layer of fiberglass and the balsa wood core exposes

the outer layer of fiberglass. The transducer can then be epoxied

directly to the outer layer of fiberglass. After the epoxy cures, the hull

is watertight and structurally sound. Remember, the sonar signal must

pass through solid fiberglass. Any air bubbles in the fiberglass or the

epoxy will reduce or eliminate the sonar signals.

WARNING:

Do not remove any material from your inner hull unless

you know the hull's composition. Careless grinding or

cutting on your hull can result in damage that could sink

your boat. Contact your boat dealer or manufacturer to

confirm your hull specifications.

To choose the proper location for thru-hull mounting, anchor the boat in

60 feet of water. Add a little water to the sump of the boat. Plug the

transducer into the sonar unit, turn it on, then hold the transducer over

the side of the boat. Adjust the sensitivity and range controls until a

Fill with epoxy

Inner hull

Epoxy to hull first

Outer hull

Flotation material

What year was this unit mfg/ what was its original price tag,im removing the tranducer from the old trolling,what must i do to ttach it to the new trolling motor? Submitted on 11-6-2022 at 04:39
Reply Report abuse
How can i fix my screen is upside down on the coda 168 Submitted on 6-1-2022 at 11:00
Reply Report abuse
I have an Eagle-II Cuda 168. My question is where is the best place to place the transducer. And which way does the signal go out from it? Submitted on 11-9-2021 at 14:19
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Eagle CUDA 168 Portable Fishfinder in the language / languages: English as an attachment in your email.

The manual is 3,88 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Eagle CUDA 168 Portable Fishfinder

Eagle CUDA 168 Portable Fishfinder Usermanual and installation guide - Dutch - 38 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Eagle CUDA 168 Portable Fishfinder Manual

Product: