and this unit, the Local Weather Station's forecast should prevail. We will not hold
responsible for any trouble that may come up due to wrong forecasting from this unit
7. Barometric Pressure Reading
7.1 Barometric Trend Pointer (A6)
The trend pointer displayed on the LCD (A6) indicates the trend of the Barometric
pressure.
7.2 Absolute / Relative Air Pressure
pressure display.
“ABS” is shown for Absolute Pressure; “REL” is shown for Relative pressure
Note: Check your local weather station for Sea Level pressure information
7.3 Past Hour Air Pressure (History) Reading
The hour is indicated on LCD (A9)
Press “HISTORY” button
pressure meter in hPa, inHg or mmHG.
7.4 Barometric Pressure Bar Graph
Barometric Pressure Bar Graph [A8]. The Graph is displayed in both hPa and inHg
Indicating the barometric
pressure trend is rising
Indicating the barometric
pressure trend is steady
Indicating the barometric
pressure trend is falling
ENGLISH 6
ENGLISH 7
8. Thermometer
8.1 RF Transmission Procedure:
for outdoor temperature after batteries are inserted.
batteries inserted. For having more than one external transmitter (Maximum3), select
the Channel, CH1, CH2 or CH3 to ensure each sensor is transmitting difference
channel before inserting batteries. The channel select switch (D3) is at the back of the
thermo sensor.
3 seconds to receive transmission manually. RF icon “
Note:
sensor’s signal unless they are well received or stopped manually.
8.2 Temperature & Humidity
(1) Outdoor Temperature--- Channel Selection
sequence is shown as follow:
PRESS “CHANNEL” button > PRESS “CHANNEL” button > PRESS “CHANNEL” button
for 3 seconds to cancel the record on this channel manually, and receive the
transmission automatically again.
(2) Maximum / Minimum Temperature / Humidity
and humidity
“
” is shown on the LCD if maximum Temperature / Humidity is shown.
“
” is shown on the LCD if minimum Temperature / Humidity is shown.
minimum reading.
Display the three
channels alternatively