665103
12
Zoom out
Zoom in
Previous page
1/20
Next page
12
USING YOUR DYSON MACHINE
PLEASE READ THE “IMPORTANT SAFETY INSTRUCTIONS” IN THIS DYSON
OPERATING MANUAL BEFORE PROCEEDING.
OPERATION
Do not use outdoors or on wet surfaces or to vacuum water or other liquids –
electric shock could occur.
Ensure the machine remains upright in use. Dirt and debris may be released if it
is turned upside down.
Do not operate while checking for blockages as doing so could result in
personal injury.
For domestic indoor and car use only. Do not use it while the car is in motion or
while driving.
To operate the MAX mode, locate the switch on the top of the appliance. Slide
the switch to the Max mode position.
To switch off MAX mode, slide the red switch back to the Powerful Suction
mode position.
This machine has carbon fiber brushes. Take care if coming into contact with
them, as they may cause minor skin irritation. Wash your hands after handling
the brushes.
DIAGNOSTICS – LIGHTS DURING CHARGING
DIAGNOSTICS – DURING USE
DOCKING STATION INSTALLATION
Use appropriate mounting hardware for your wall type and ensure that the
docking station is mounted securely. Ensure no pipe work (gas, water, air) or
electrical cables, wires or ductwork are located directly behind the mounting
area. The docking station must be mounted in accordance with regulations
and applicable codes/standards (state and local laws may apply). Dyson
recommends the use of protective clothing, eyeware and materials when
installing the docking station.
CARPETS OR HARD FLOORS
Before vacuuming your flooring, rugs and carpets, check the manufacturer's
recommended cleaning instructions.
The brush bar on the machine can damage certain carpet types and floors.
Some carpets will fuzz if a rotating brush bar is used when vacuuming. If this
happens, we recommend vacuuming without the motorized floor tool and
consulting with your flooring manufacturer.
Before vacuuming highly polished floors, such as wood or linoleum, first check
that the underside of the floor tool and its brushes are free from foreign objects
that could cause marking.
LOOKING AFTER YOUR DYSON MACHINE
Do not carry out any maintenance or repair work other than that shown and
described in this Dyson Operating Manual, or advised by the Dyson Helpline.
Only use parts recommended by Dyson. If you do not this may invalidate
your warranty.
Store the machine indoors. Do not use or store it below 37.F (3°C). Ensure the
machine is at room temperature before operating.
Clean the machine only with a dry cloth. Do not use any lubricants, cleaning
agents, polishes or air fresheners on any part of the machine.
VACUUMING
Do not use without the clear bin and filters in place.
Fine dirt such as plaster dust or flour should only be vacuumed in very
small amounts.
Do not use the machine to pick up sharp hard objects, small toys, pins, paper
clips, etc. They may damage the machine.
When vacuuming, certain carpets may generate small static charges in the
clear bin or wand. These are harmless and are not associated with the central
electricity supply. To minimize any effect from this, do not put your hand or
insert any object into the clear bin unless you have first emptied it. Clean the
clear bin with a damp cloth only. (See “Cleaning the clear bin”.)
Use extra care when cleaning on stairs.
Do not rest the machine on chairs, tables, etc.
Do not press down on the nozzle with excessive force when using the machine as
this may cause damage.
Do not leave the cleaner head in one place on delicate floors.
On waxed floors the movement of the cleaner head may create an uneven
luster. If this happens, wipe with a damp cloth, polish the area with wax, and
wait for it to dry.
EMPTYING THE CLEAR BIN
Empty as soon as the dirt reaches the level of the MAX mark – do not overfill.
Ensure the machine is disconnected from the charger before emptying the clear
bin. Be careful not to pull the “ON” trigger.
To make emptying the clear bin easier, it is advisable to remove the wand and
floor tool.
To minimize dust/allergen contact when emptying, encase the clear bin tightly in
a plastic bag and empty.
To release the dirt, hold the appliance by the handle, pull the red lever back and
lift upwards to release the cyclone. Continue until the bin base automatically
opens and releases the dirt.
Remove the clear bin carefully from the bag.
Seal the bag tightly, dispose as normal.
To close, push the cyclone downwards until it is in the normal position and
manually close the base of the bin – the base will click when it is securely
in place.
CLEANING THE CLEAR BIN
Ensure the machine is disconnected from the charger before removing the clear
bin. Be careful not to pull the “ON” trigger.
Remove the wand and floor tool.
To remove the cyclone, hold the appliance by the handle, pull the red lever
towards you and lift upwards until the bin opens, then push in the red button
located behind the cyclone and lift the cyclone out.
To detach the clear bin from the appliance, pull back on the red catch located
at the base, slide the clear bin down and carefully remove forwards from the
main body.
Clean the clear bin with a damp cloth only.
Do not use detergents, polishes or air fresheners to clean the clear bin.
Do not put the clear bin in a dishwasher.
Ensure the clear bin is completely dry before replacing.
To replace the clear bin, align the tabs on the clear bin with the grooves on the
main body and slide upwards into place until the catch clicks.
Slide the cyclone into the grooves of the main body and push downwards until
it is in its normal position and manually close the base of the bin – the base will
click when it is securely in place.
WASHABLE PARTS
Your appliance has washable parts, which require regular cleaning. Follow the
instructions below.
Charging from low.
Charging, nearly full.
Charger fault – call the Dyson Helpline.
Charging, medium charge.
Fully charged.
Battery fault – call the Dyson Helpline
High level of charge.
Low level of charge.
Battery fault – call the Dyson Helpline
Medium level of charge.
Empty – please recharge.
Main body fault – call the Dyson Helpline.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dyson V8 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dyson V8 in the language / languages: English, Spanish as an attachment in your email.

The manual is 3,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Dyson V8

Dyson V8 User Manual - All languages - 80 pages

Dyson V8 User Manual - All languages - 41 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info