792730
7
Zoom out
Zoom in
Previous page
1/14
Next page
Minimise dust contact
Empty as soon as the dirt reaches the MAX level – don’t overfill. Using your
machine when the dirt is above the MAX line may affect the performance
and require more frequent filter washing.
Emptying your bin
Press the red wand release button, on the top of the wand, and pull the wand
away from the bin.
Hold the machine over the bin, pointing downwards.
Firmly push the red bin release button. The bin will slide down, cleaning the
shroud as it goes, and the bin base will open.
The bin base won’t open if the red bin release button isn’t pushed down all
the way.
Release the dirt
Cover your bin tightly in a dust proof bag while you empty. Remove your bin carefully,
seal the bag tightly and dispose.
Close the bin
Push the bin base upwards until your bin and bin base click into place.
Remove your wand
If it is necessary to clean your bin, empty it as shown in the ‘Emptying your
bin’ section.
Press the red button located on the bin runner to release the bin and slide
your bin off the runner.
Only use a damp, lint-free cloth to clean your bin.
Make sure that your bin and seals are completely dry before replacing.
Cleaning your bin
Remove your bin
Refit your bin
9,927,641
1.1M
450K
1.6K
10m 60 180 500
45:37
Overfilling your bin could result in inaccurate readings on the particle graph.
Insert the spine on to the bin runner.
Close your bin by pushing the bin base upwards until the bin and bin base click into place.
Your bin isn’t dishwasher safe and the use of detergents, polishes or air fresheners to clean
your bin isn’t recommended, as it may damage your machine.
9,927,641
1.1M
450K
1.6K
10m 60 180 500
45:37
The MAX mark on the bin of
the machine, showing that
the dirt should not be filled
over the Max mark when
the machine is at the angle
of normal use.
Illustration of the bin being
emptied into a bag with imag-
es demonstrating to take care
not to press the trigger when
emptying the bin.
The bin lid closing with an audible
click and the bin being pushed up-
wards with another click once it is fully
in place.
The bin being removed and the
location of the bin release lever on
the underside of the bin runner.
The bin being pushed back
into position on the bin
runner.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dyson V12 Detect Slim at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dyson V12 Detect Slim in the language / languages: English as an attachment in your email.

The manual is 50.02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Dyson V12 Detect Slim

Dyson V12 Detect Slim User Manual - German - 13 pages

Dyson V12 Detect Slim User Manual - Dutch - 13 pages

Dyson V12 Detect Slim User Manual - French - 14 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info