669057
75
Zoom out
Zoom in
Previous page
1/88
Next page
75
HOW TO USE
1. Insert your hands and the hand dryer will start automatically, creating sheets of air to scrape water from your hands.
2. Move your hands up and down slowly through the air.
TROUBLESHOOTING GUIDE
WARNING: RISK OF ELECTRIC SHOCK.
Problem Action
The hand dryer fails to start. Check fuse/circuit breaker is working and that the power supply is connected. Must be
performed by a qualified electrician.
If a safe method of switching is available, turn the unit on and off. If a safe method is
not available, a qualified electrician must perform this task.
The hand dryer sometimes cuts out when in use but
resumes operation after a period of time.
Check the air inlet is clean and free of dust. If the air inlet is dusty or dirty simply remove
the dust or debris with a soft cloth.
The dry time of the hand dryer has increased. Inspect the inlet grille for dust and remove.
Inspect filters and change if required.
The air flow from the hand dryer has decreased. Inspect the inlet grille for dust and remove.
Inspect filters and change if required.
If you have any further questions please contact the Dyson Helpline at 1-888-DYSON-AB.
USE IN FOOD PREPARATION AREAS
This hand dryer is suitable for use in food preparation areas. However to use a PC-ABS model in food handling areas
two rubber front fascia plugs must be installed. These are different from the plugs received with the unit.
If you are a food manufacturing, processing or catering unit please contact the Dyson Helpline in the number on the
back cover. You will receive a fascia plug pack, which includes the rubber plugs and instructions for fitting.
If you are installing this hand dryer in a food handling or food manufacturing environment, please contact the Dyson
Helpline for the specialist installation guide that supports this.
CLEANING
The hand dryer should be cleaned daily. Follow these 3 simple steps to ensure the machine performs to its best and
remains hygienic. Using the wrong cleaning method or product may invalidate your warranty.
1. Wipe all surfaces and the 4 sensor lenses with a soft cloth and non-abrasive cleaner. Particular attention should be
paid to the seals and sides of the unit.
2. Clean the air inlets on the base REGULARLY.
3. Clean the floor beneath and around the unit. This may be required more regularly in high use areas.
GENERAL ADVICE
All cleaning chemicals should be used exactly as indicated by the manufacturer’s instructions (including
appropriate dilution).
If a cleaning product is left on the machine for too long, a film will form. This may reduce the effectiveness of the anti-
microbial surfaces.
Any chemicals intended for use should first be tested on an inconspicuous area to confirm suitability.
Aside from cleaning chemicals, care should be taken to avoid any harmful fluids from coming into contact with the unit,
in particular oils and alcohol-based products.
CHEMICAL GUIDELINES
Many professional cleaning chemicals can be used. The following are some that are harmful to the unit and should not
be used. Use of these will invalidate your warranty.
Do not use:
Alcohol-acid mixes
Alcohol
Solvent /oil-based products
Quaternary ammonium
Alkali-bleach mixes
Foaming ingredients
Bleach or abrasive cleaners
Do not pressure wash
WATER GUIDELINES
This hand dryer has an IP35 certification.
Hand clean only. Do not pressure wash. Pressure washing may force water inside the casing, creating a risk
of electric shock and invalidate your warranty.
FILTER MAINTENANCE/AIR INLET
Regularly check the air inlet at the base of the hand dryer to ensure that it is free from dust and debris. Simply wiping
the inlet with a soft cloth should be sufficient to remove dust and debris.
If required for high usage environments, a Dyson filter change kit provides everything needed to change your machine’s
HEPA filter on site. Contact the Dyson Helpline at 1-888-DYSON-AB for more information.
Filter cleaning or replacement for your hand dryer can be carried out by carefully following the instructions given in the
filter change kit. If in any doubt, consult a qualified electrician or contact the Dyson Helpline at 1-888-DYSON-AB
for support.
SERVICING
If your hand dryer needs servicing, please call the Dyson Helpline at 1-888-DYSON-AB.
Also visit the website at www.dysonairblade.com
DISPOSAL INFORMATION
Please dispose of this product responsibly and recycle where possible.
CONFORMITY STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation, notwithstanding use by the general public in commercial, business and industrial environments. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the users authority
to operate the equipment.
PLEASE REGISTER AS A DYSON AIRBLADE dB HAND DRYER OWNER
To help us ensure you receive prompt and efficient service, please register your unit at www.dysonairblade.com
This will register your warranty, confirm ownership of your Dyson unit in the event of an insurance loss, and enable us to
contact you if necessary.
You will need your serial number, which is on the rating plate on the base of your unit, on a registration sheet in the box,
and also on an information sticker on the front of the unit when it is unpacked.
Please ensure all instructions and guidance in this operating manual and the installation guide are adhered to or your
warranty may be invalidated.
YOUR LIMITED WARRANTY
Terms and Conditions of the Dyson 5 year parts warranty and 1 year limited laborwarranty.
If you have registered your unit online, your warranty will start from the date of purchase. Please retain your proof of
purchase. If you do not have your proof of purchase, your warranty will start 90 days after the date of manufacture,
according to Dyson’s records.
This warranty will be void if the unit is installed and used in a country outside the one in which it was sold.
75


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dyson Airblade dB - AB14 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dyson Airblade dB - AB14 in the language / languages: All languages as an attachment in your email.

The manual is 4,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Dyson Airblade dB - AB14

Dyson Airblade dB - AB14 Additional guide - All languages - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info