Manual Dynavin N6 Dynavin N6 (page 69 of 77) (English)

577202

Zoom out

Zoom in

1/77

icons

A2DP

Warning do not open the case. Only open the case if you get the permission from the

manual or an authorized technician. In contravention the warranty expired.

Attention ! Do not overload the power cords or extension cables. Fire risk

Attention! Do not use foreign objects and put them into the opening of the unit. Danger of

short circuit and damaged board.

Attention! If any cable or connector is damaged please make the unit powerless and

contact your dealer.

Attention! If any cable is squeezed make the unit powerless and contact your dealer.

Attention! If the unit makes noises smolder or smell bad turn oﬀ the unit and contact your

dealer !

Attention! Don´t put the unit in direct sunrays heat sources or heater. The Unit can be

damaged by to high temperatures.

Attention! Be sure that the unit has a good airﬂow. Do not close the openings with

anything.

Do not try to repair the unit yourself. If its needed to repair the unit use only our service

partner. In contravention the warranty expired.

If you must change a fuse be sure that the power connection is separated and that you

use the same fuse as before.

Attention! On diﬀerent units a Laser is installed do not open the case and do not look into

the light. Risk of eye injury.

Attention! Do not use any magnetic part or lay down a magnet to the unit. Danger of lost

ﬁles or damaged units.

Product features

The unit oﬀers a variety of new uses.

The new Dynavin developed by combination of multimedia device and the new

operating system based on Microsoft © Windows, you have a number of new optical

and technical properties.

Operating system : DynOS – self programmed system from Dynavin

CPU : 833 MHz

Internal memory : 4 GB

Multitouch TFT 6.2/7“ Display

Resolution von 800 x 480

16:9

Navigation Navi-SW : IGO-Primo ( Preinstalled )

Handsfree Parrot

A2DP Music playback

iPod© controlling Connecting an iPod ® and iPhone ® via USB

Aux-In

SD / Micro-SD slot for navigation and media playback

USB 2.0 for music and video playback well as the connection for iPod and iPhone

Supports depending on the vehicle, the original PDC and camera system.

External connections

Video-Out

Audio-Out

A/V-In

Possible connection of a DAB or DVB-T device with control via the touch screen.

ANYEN

BT MIC

REAR

MONI TO R 2

REAR ZO NE

OUT L

REAR ZO NE

OUT R

DATA_ TX

PARK ING

YELLO W

RED

WHITE

REAR

MONI TO R 1

CAMER A

AUX IN/ R

AUX IN/ L

BROWN

YELLO W

RED

WHITE

AUX IN VI DE O

WHITE

RED

WHITE

RED

GREEN

LINE OU T

FRONT L

LINE OU T

FRONT R

LINE OU T

REAR L

LINE OU T

REAR R

LINE OU T

SUB WOOFE R L

LINE OU T

SUB WOO FE R R

ACTIV E

TV/DAB+

INTER NE T

MEDIA

P. CNTR

12V

0.75A MAX

MOST I NTERFACE

AUX IN R

CAN IN TERFACE

AUX IN R

B1, Rear rig ht sp eaker + purple

B2, Rear rig ht sp eaker- purple & black

B3, Front ri ght s peaker + Grey

B4, Front ri ght s peaker- Grey & Black

B5, Front le ft sp eaker + White 1

B6, Front le ft sp eaker - white & black

B7, Rear lef t spe aker + Green 1

B8, Rear lef t spe aker-Green & Black

A1, CAN TX Brown & Black

A2, CAN RX Bro wn

A3, Revers e det ecting Green

A4, +12V Yello w

A5, AUTO ANT & AMP CON B lue

A6, Illumi nat ion Orange

A7, ACC Red

A8, Ground B lac k

1 3 5 7

2 4 6 8

1 3 5 7

2 4 6 8

1 Din Most -connection

GPS

ANYENN

FAKR

A P

REAR

MONI TO R 2

REAR ZONE

OUT L

REAR ZONE

OUT R

DATA_ T

PARK IN G

YELLOW

RED

WHITE

REAR

MONI TO R 1

CAMERA

AUX IN/R

AUX IN/L

BROWN

YELLOW

RED

WHITE

AUX IN VIDEO

WHITE

RED

WHITE

RED

GREEN

LINE OUT

FRONT L

LINE OUT

FRONT R

LINE OUT

REAR L

LINE OUT

REAR R

LINE OUT

SUB WOOFER L

LINE OUT

SUB WOOFER R

ACTIVE

TV/DA B+

INTERNET

MEDIA

P. CNTR

12V

0.75A MAX

MOST INTE RFACE

AUX IN R

CAN INTER FACE

AUX IN R

B1, Rear right speaker + purple

B2, Rear right speaker- purple & black

B3, Front right speaker + Grey

B4, Front right speaker- Grey & Black

B5, Front left speaker + White 1

B6, Front left speaker - white & black

B7, Rear left speaker + Green 1

B8, Rear left speaker-Green & Black

A1, CAN TX Brown & Black

A2, CAN RX Brown

A3, Reverse detecting Green

A4, +12V Yellow

A5, AUTO ANT & AMP CON Blue

A6, Illumination Orange

A7, ACC Red

A8, Ground Black

1 3 5 7

2 4 6 8

1 3 5 7

2 4 6 8

BT MIC

2 Din CAN connection

GPS

ANYENNA

FM/AM ANTENNA

BT MIC

REAR

MONI TOR 2

REAR ZONE

OUT L

REAR ZONE

OUT R

DATA_TX

PARKING

YELLOW

RED

WHITE

REAR

MONI TOR 1

CAMERA

AUX IN/R

AUX IN/L

BROWN

YELLOW

RED

WHITE

AUX IN VIDEO

WHITE

RED

WHITE

RED

GREEN

LINE OUT

FRONT L

LINE OUT

FRONT R

LINE OUT

REAR L

LINE OUT

REAR R

LINE OUT

SUB WOOFER L

LINE OUT

SUB WOOFER R

ACTIVE

INTERNET

MEDIA

P. CNTR

12V

0.75A MAX

AUX IN R

CAN INTERFACE

B1, Rear right speaker + purple

B2, Rear right speaker- purple & black

B3, Front right speaker + Grey

B4, Front right speaker- Grey & Black

B5, Front left speaker + White 1

B6, Front left speaker - white & black

B7, Rear left speaker + Green 1

B8, Rear left speaker-Green & Black

A1, CAN TX Brown & Black

A2, CAN RX Brown

A3, Reverse detecting Green

A4, +12V Yellow

A5, AUTO ANT & AMP CON Blue

A6, Illumination Orange

A7, ACC Red

A8, Ground Black

1 3 5 7

2 4 6 8

1 3 5 7

2 4 6 8

Buttons on the front panel and their meaning

The keys given here are not to be found in view of all of Dynavin devices.

This just gives you an overview of the keys and their functions in general. Therefore, pay attention in

your speciﬁc product and which keys to this present.

Screen of front side of a unit

= Previous track

= Next track

= CD/DVD eject

= Play/Break

Disc = CD/DVD Option

iPod ® = iPod® Option

USB = USB Option

TV = TV/DVB-T Option

Right -hand rotary knob

- Press = phone function

- Turn = Depending on the function Next / Previous for example, songs

Left knob

- Press = on / oﬀ switch (standby)

- Turn = loud / quiet

SRC = Select Medium / Go to the main menu

NAV = Call navigation menu

Mute = Mute

Radio = Call the Radio menu

BND = Switching from FM

and AM

TEL = Opens the phone mode

SD = Opens the SD Card Menu

AUX = Opens the AUX menu

1-6 = Radio station memory buttons

First steps

If you have connected the device as indicated, turn on the ignition of the vehicle. The multimedia

device will then turn on the ﬁrst time. This may take about 30 seconds. This takes you to the radio

interface.

Radio screen

Operation of the touchscreen

Most functions of the Dynavin device are controlled through the touch surface. This means that you

should to ensure the most accurate possible control perform a calibration of the screen.

To facilitate the operation, some functions and actions you can perform on the screen shown with

symbols in the instructions.

Touch the screen (short)

Touch the screen (long)

Press and hold and move

As on a smartphone you can move the surfaces. To do this, touch the screen and slide the surface to

the left or right.

Calibration

To do this, ﬁrst press on the left side of the SRC button. This will take you to the main menu of the

Dynavin unit.

Now select the main menu

Setting icon.

Touch just the icon

with a ﬁnger on the screen.

This can be found on the second page of the main menu

In the settings menu press on the lower part of the menu screen - calibration.

If you feel that the screen does not respond accurately to your commands, you can perform on the

menu a screen calibration again. To do this press as indicated in the image a sequence 1-5 and

following the cross as central as position in the circle.

Once you have selected the last point you will automatically return to the setup menu.

System settings

In the system settings you can now make even some of

the basic options and settings of the device.

Through a brief touch of the box

next to the words, the option will be Enable.

A hook

indicates that the option is selected

Brake

So that you are not distracted during the journey, the playback from movies or DVB-T will be inhibited.

You get when you release the handbrake an information image that this is not allowed while traveling.

If you still want to activate the image while traveling make this one the menu with the brake option.

Warning :

Find out by those in force in their country guidelines and legal regulations. If you enable this option

illegally, this can lead to substantial ﬁnes.

This is a setting that is not enabled for general use of Dynavin and is no acquisition of said ﬁnes

concedes.

This setting is only activated by the user and owner, and thus this also

assumes all responsibility

activation.

Brightness

You have several ways to adjust the brightness and control. This includes also the dimming function

Touch ﬁrst the down arrow key right of the menu item Auto / Manual

After touching the arrow there will be open the sub-menu.

Depending on the selected function will be

another option in the settings unlocked.

Auto = Automatic switching the dimming function

Illumination = switch when light is turned on

Sensor = light detection in the interior of the vehicle

Manual = Manually adjust the backlight

Only when you have completed the selection the submenu close automatically.

After selecting a new button will be displayed. In Manual right of the lettering or car below the buttons.

Then press on the slider to set the setting lever

for the dimming function

Through a Side Slide-motion you can adjust the slider to the desired value.

Navi Media Info

If you have enabled this option will be displayed in navigation mode in an additional shot.

You can display a variety of media:

Radio, iPod, USB, Aux and so on

If you need the full navigation screen, you can also reduce the displayed image by pressing the button

in the picture. To represent this again press the button again.

Dual Zone

If you have enabled the option is displayed on the navigation Monitor and played back a movie in the

passenger area.

Language

Here you can set your desired menu language.

You have a choice of up to

10 languages.

It may happen that

one of the selected

languages

the

meaning is not clear

translate

the text

too long.

Then

it may be that

the

English

text of which is

to be seen.

Reverse

If your car have an ORIGINAL PDC system installed or have an original rear view camera, you can re-

enable these depending on vehicle type.

This is NOT at all Vehicle types and construction

possible. Please refer to the compatibility

information from Dynavin.

None : When no system is installed

PDC : If only one PDC system is installed

CAM : If only a rear view camera is installed

PDC+CAM : When both systems are installed in the vehicle.

If you selected None and use than the reverse gear nothing happens, the screen remains in the

current menu.

If you have selected PDC and you take the reverse gear a new image appears.

Depending on the vehicle and vehicle system it is also possible that the front PDC information is

displayed.

Please note that this systems have only

a supporting role. Faulty measurements caused by not

properly built in systems or by environmental eﬀects caused interference can not be compensated by

the system.

These systems do not replace the personal control and the minimum clearances

Have you selected CAM is transmitted the image of the rear view camera.

Please note that during the transmission of the image by settings of the camera and by the installation

of angle or externally caused interference visibility may be disturb.

These systems do not replace the personal control and the minimum clearances.

When activated PDC + CAM both information will be displayed in one screen.

If you get a call in that time when you are using the PDC system of your car the call will be displayed

as a 2nd window in the screen corner.

For more functions move the menu bar to

the bottom. The easiest way you can do this

with reach the scroll bar on the right side of

the screen.

Time Zone

In this menu item you can set the time zone in which you are located.

Touch Screen Adjust

If you feel that the screen does not respond accurately to your commands, you can perform on the

menu a screen calibration again. To do this press as indicated in the image a sequence 1-5 and

following the cross as central as position in the circle.

Once you have selected the last point you will automatically return to the setup menu.

Main menu

The device features for common across diﬀerent levels (pages). The main menu is divided into three

sites. You can move the window on a slide motion

Touch the screen with a ﬁnger and then move it to

the right or to the left. This moves you to the

individual pages of the main menu.

You can do this in almost every menu on the

same way

The three points on the lower side of the display

shows you which side is open and to which

direction you can move.

If you just touch one of the icons on the

screen with a ﬁnger, thus opens the selected

menu. This is only possible if the selected

device is connected or the function has been

enabled.

The marked symbols on the ﬁrst image have a special function. These can be replaced according to

your wishes.

Change icons

To move a function icon proceed as follows.

You have the option to change two of the options

from the ﬁrst page by functions of the last (third)

menu page.

In the left picture you see the interchangeable

functions are Highlighted.

Go through a scrolling movement to the third

menu page.

Touch and hold to the function you want to

move with a ﬁnger.

After the ﬁrst two seconds, the icon for the selected function is caused and you will automatically be on

the ﬁrst menu page. Continue holding your ﬁnger on the screen.

Move the function you selected on that function you

wish to exchange

Now take your ﬁnger oﬀ the screen. The functions

will be exchange thereby automatically.

Radio function

To get to the radio function, press in the Main

Menu the radio icon, or use the radio button

on the front of the device.

Overview of buttons

= Manual tuning

= Station keys 1-15

By scrolling to the left or right to access all presets.

= back to main menu

= Radio options

= Frequency adjust manually

= Automatic search

The ﬁve strongest stations will be stored automatically

= Change frequency between AM/FM

APS

BAND

Radio -Options

– Radio options

Through a brief touch the box next to the words the option is Enable.

A hook indicates that the option is selected

AF = Alternative frequency

When choose it, will appear AF characters on the top of the radio menu. this allows a

receiver to transform a diﬀerent frequency providing the same station when the ﬁrst

signal becomes too weak.

Automatic

This additional function of AF,You can select whether the AF function of the station you are

listening is to be exchanged for another (Automatic) or that the station is to be maintained and

only a new stable frequency to be searched.

TA = Traﬃc Announcement

If this option is enabled, traﬃc messages can be recorded in the current

program automatically.

Radio Text

If you have activated this function, information can be transmitted by the radio station to your

radio. For example, information about played song or information about the current program

as well as the station name.

Dual Radio Antenna

If this feature is enabled, the original vehicle diversity system can still be used. For example, in

cars from Audi

Region

Select th

e region where you are located. This is necessary to the radio tuner to provide the

required frequency ranges.

TMC Frequency adjust

Here you can set whether always the strongest stations in the region to be selected for the TA

function, or the station you hear in the moment.

CD/DVD function

To access the CD / DVD feature, insert a disk into the drive, or if already a medium is in the drive,

press the button labeled disc on the front of the device or from the main menu via the touch screen. By

touching the icon Disk

After you insert the disc the playback of the music or movie will start automatically.

To eject the CD again press the front panel button to eject the medium.

If you do not want to eject the media, but want to return to the previous menu, brieﬂy press the SRC

button on the front of the device.

Menu for the music playback via CD / DVD

With a short press on the buttons you can

select the following.

Previous track

Next track

: Play / Pause

: Repeat

Press one´s - The song is repeated once

Press twice - The song is repeated at constant.

The symbol for repetition is in the upper line displayed as conﬁrming the

selection.

: Shuﬄe

In this setting, the songs are purely c

oincidental from the folder played where

you are. The symbol for Shuﬄe is in the upper line displayed as conﬁrming the

selection

CD/DVD movie playback

By a slight pressure on the touch screen,

you can call the functions listed below.

: Previous track

: Next track

: Play / Pause

: Without function

: Back to main menu

More Features

This additional button opens provides you more

control options to control the movie.

: Fast forward

: Fast rewind

: Repeat

: Shuﬄe

: Switch the audio channel

: Select subtitles

Phone function

To access the Phone function, press on the touch panel displayed option or press and release the

right knob.

In order to use the phone or Bluetooth function, connect ﬁrst your phone to your Dynavin unit.

Enable the BT option on your phone and search for any nearby devices. If your phone has ﬁnished the

search, you should see the display Dynavin-N6. Pair the phone with the device.

Once your cell phone or smartphone connected to the Dynavin unit, this is displayed in the menu.

Disconnect, in the upper left corner and the gray

icons in the lower left corner show to you

that the phone is not connected with the unit.

When the connection is established, the name

of the phone is at the top left. Top right when

the phone transmits information of the state of

charge and the ﬁeld strength is displayed.

Left below the icons for the phone book and favorites are displayed.

Once the connection is made y

our phone will connect every time even if you have the BT option

switched on and the phone is within the range of the device.

Buttons function in phone menu

By a slight pressure on the touch screen, you can call the functions listed below.

Delete input

Each time you press the button, the last digit is the

deleted entered numbers

Call History

Here are the most recent incoming and outgoing calls appropriate

: Phonebook

Here are all the entries from the phonebook of your mobile phone

displayed. When they were transferred.

: Answering a call

Accept incoming calls or call the selected numbers.

: Hang up call

End calls or reject incoming calls.

: Enabling private mode

When calls are not to be reproduced through the speakers but only

over the phone.

: Back to main menu

Call History

Here are the most recent incoming and outgoing calls appropriate

By scrolling movement to the left or right, you can call all contacts displayed.

With a short press on the icons you can select the following.

Display the Phonebook

Calling the last incoming calls

There are the last 20 calls Showing

Call the last outgoing calls

There are the last 20 calls Showing

: Call the last missed calls

There are the last 20 calls Showing

: Calling Favorites

: Back to previous menu

Phonebook

All entries from the phone book of your phone are displayed.

When they were transferred from the mobile phone.

When you call the phone book option it will take you directly to the search mode.

By brieﬂy pressing the function keys, you can select the following.

Select the keyboard language

You have the option between Cyrillic, Greek, Latin

Delete the last entry

123

Switch between numeric / special characters and letters

: Show and hide the keyboard

Touching one of the letters or symbols of the on-screen virtual keyboard is considered as input for the

search and is presented on the top line.

Here you can search by name or phone numbers. The selection of the contacts found will be shown

immediately.

If you select a contact, it will be displayed in a new window.

Contact from the phonebook

You can now access the following functions on the three buttons below the contact.

: Call contact

: Select another phone number that is stored under the contact

Depending on how many numbers you have assigned to a contact

You can select this button, the stored numbers

: Save to favorites

At this moment, this contact is also guided to your favorites.

If you connect a diﬀerent phone with the Dynavin unit, the in-memory contacts are overwritten.

It is only possible to connect one phone to the machine.

Should you connect a phone to the device wherein the transmission of the phonebook has been

deactivated, all entries are so that these can not be grayed out for strangers.

iPod function

To access the iPod function, brieﬂy press the touch screen and iPod ® option or press and release the

push button on the front of the Dynavin device is labeled with iPod.

You can only enter the menu if you have also connected an iPod to the unit via USB.

Use only USB to iPod® cable were also given by Apple® free to use. Otherwise, it may result in

malfunction or your iPod® is not recognized by the device.

After pressing the iPod button the home screen will open and the contents of the iPod® is charging.

Depending on the size and amount of data, this can take a few seconds.

After all required information has been loaded the playback interface appears on the screen.

You can run almost all of the options as you are used to from your iPod® on the screen.

Functions of the iPOD® menu

With a short press on the buttons you can select the following.

Previous track

: Next track

: Play / Pause

: Repeat

Press one´s - The song is repeated once

Press twice - The song is repeated at constant.

The symbol for repetition is in the upper line displayed as conﬁrming the selection.

: Shuﬄe

In this setting, the songs are purely coincidental from the folder played where you are.

The symbol for Shuﬄe is in the upper line displayed as conﬁrming the selection.

: iPod® option menu

: Back to main menu

Note :

You can not play any kind of video in iPod® mode

Display symbol for Repeat

Display symbol for Shuﬄe

iPod options menu

With a short press on the buttons you can select the following.

With an up and down scroll motion, you can search the songs, artists,or playlists in the

displayed table.

Open the iPod® album menu

Open the iPod® artist menu

: Open the iPod® song menu

: Open the iPod® playlist menu

Opens the Input menu to search

Opens the search window with a virtual keyboard.

The scroll bar will show you where you are in the list and gives an indication

of how many ﬁles are to be found in the list.

Menu for the albums

If you have opened the menu for the Albums you will see all albums which are stored like the picture

above.

A short press on the name of an album opens this and all the songs stored in the album are

displayed.

With a further pressure on one of the saved songs will be selected and played.

With an up and down motion, you can browse the songs or albums in the table which is

displayed to you.

If you want to browse the contents of the folder, use

the search function in the menu. By pressing the

keyboard icon, the virtual input option will be shown.

Beginning with the ﬁrst letter of a title you can then

browse the contents

Press these button and return back to the previous menu.

Menu for the artists

If you will open the menu for the performers all stored artist with name will be displayed to you.

A short press on the name of an artist opens up new window with either all albums of the artist

or the stored songs when no album has been deposited

With a further pressure on one of the saved songs will be selected or start to play.

With an up and down motion, you can browse the songs or artists or albums in the table which

is displayed to you.

If you want to browse the contents of the folder,

use the search function in the menu. By pressing

the keyboard icon, the virtual input option will be

shown. Beginning with the ﬁrst letter of a title you

can then browse the contents

Press this button and return back to the previous menu.

Menu for playlists

If you have opened the menu for the playlists you will see all of them like the picture above

A short press on the name of a playlist will open this and all the songs stored in the album are

displayed.

With an up and down motion, you can browse the songs or artists or albums in the table which

is displayed to you.

If you want to browse the contents of the folder, use

the search function in the menu. By pressing the

keyboard icon, the virtual input option will be shown.

Beginning with the ﬁrst letter of a title you can then

browse the contents

Press this button and return back to the previous menu.

Menu for the songs

If you will open the menu for the songs all stored songs with title will be displayed to you

A short press on the title of a song that is shown to you will start playing the song.

An icon to the left side of the song title will show you what song is currently playing

With an up and down motion, you can browse the songs in the table which is displayed to you

If you want to browse the contents of the folder,

use the search function in the menu. By

pressing the keyboard icon, the virtual input

option will be shown. Beginning with the ﬁrst

letter of a title you can then browse the contents

Press this button and return back to the previous menu.

USB function

To access the USB function press on the touch screen, this option or press the push button on the front

of the Dynavin device that is labeled USB.

You can only enter the menu when you used to connect a USB device to the device via USB.

Use only USB media formatted with FAT16/32. Otherwise it can happen that the unit can not be read

in the media. The connected USB media should not exceed a maximum of 64 GB.

After pressing the USB button the USB menu is invoked and the content will be loaded. Depending on

the size and amount of data, this can take a few seconds.

If you want to use a hard disk, please pay attention to the necessary operating current. Since some

hard drives have a higher consumption as it can be supplied by Dynavin unit.

It can therefore happen that you have to use an external power source.

Functions in USB mode

With a short press on the buttons you can select the following.

Previous track

: Next track

: Play / Break

: Repeat

Press one´s - The song is repeated once

Press twice - The song is repeated at constant.

The symbol for repetition is in the upper line displayed as conﬁrming the selection.

: Shuﬄe

In this setting, the songs are purely coincidental from the folder played where you are.

The symbol for Shuﬄe is in the upper line displayed as conﬁrming the selection.

: iPod® option menu

: Back to main menu

USB Options

With a short press on the buttons you can select the following.

With an up and down scroll motion, you can search the songs, artists, or playlists in the displayed

table.

Opens all music information on the USB media

Opens all movie ﬁles on the USB media

Opens all image formations on the USB media

Opens all the information of the USB stick in a directory structure

Opens the Input menu to search

Opens the search window with a virtual keyboard.

The scroll bar will show you where you are in the list and gives an indication of how

many ﬁles are to be found in the list.

Menu for the albums

If you have opened the menu for the Albums you will see all albums which are stored like the picture

above.

A short press on the name of an album opens this and all the songs stored in the album are

displayed.

With a further pressure on one of the saved songs will be selected and played.

With an up and down motion, you can browse the albums in the table which is

displayed to you.

If you want to browse the contents of the folder, use

the search function in the menu. By pressing the

keyboard icon, the virtual input option will be shown.

Beginning with the ﬁrst letter of a title you can then

browse the contents

Press this button and return back to the previous menu.

Menu for the artists

If you will open the menu for the performers all stored artist with name will be displayed to you

A short press on the name of an artist opens up new window with either all albums of the artist

or the stored songs when no album has been deposited

With a further pressure on one of the saved songs will this be selected or start to play.

With an up and down motion, you can browse artists in the table which is displayed to you.

If you want to browse the contents of the folder, use

the search function in the menu. By pressing the

keyboard icon, the virtual input option will be shown.

Beginning with the ﬁrst letter of a title you can then

browse the contents

Press this button and return back to the previous menu.

Menu for the songs

If you will open the menu for the songs all stored songs with title will be displayed to you.

Back to previous menu

A short press on the title of a song that is shown to you will start playing the song.

An icon to the left side of the song title will show you what song is currently playing

With an up and down motion, you can browse the songs in the table which is displayed to you.

If you want to browse the contents of the folder, use

the search function in the menu. By pressing the

keyboard icon, the virtual input option will be shown.

Beginning with the ﬁrst letter of a title you can then

browse the contents

Press this button and return back to the previous menu.

The menu for movie playback

A short press on the title of a movie will start playing it.

With an up and down motion, you can scroll the list of ﬁlms in the table which is displayed.

With a short press on the buttons you can select the following.

Previous track

: Next track

: Play / Pause

: Stop

: Fast forward

: Back to previous menu

: Back to main menu

The menu to view images

A short press on one of the pictures this is in large format will be shown.

With an up and down motion, you can scroll through the pictures in the displayed table.

You can save images which are saved on the SD-Card or USB device in the initial screen. These are

then displayed when the Dynavin unit starting up.

You can use any kind of picture you have stored on the card like JPG, PNG or BMP ﬁles.

To do this, press on the icon in the bottom left corner. As shown in the picture above.

That your chosen image is saved as the startup screen, will be conﬁrmed by the green icon in the

bottom left corner.

If you want to delete this again, press again the memory button in the image.

For conﬁrmation, you will instead of a green symbol, a red appears when the image was deleted as

the start screen.

The menu for the folder structure

With an up and down motion, you can scroll the directories in the Browse in the displayed table.

If you select a folder, you can go to the other sub-directories and then access the desired content.

If you touch the keyboard icon, you can open the search function. By typing on the keyboard, you can

search for speciﬁc ﬁles and folders.

SD-Card

To access the SD card function, an SD card in the MMC slot on the front panel must be plugged.

The card can have a storage capacity of up to 64GB.

With a short press on the buttons you can select the following.

With an up and down scroll motion, you can search the songs, artists, or playlists in the

displayed table.

Opens all music information on the SD media

Opens all movie ﬁles on the SD media

Opens all image formations on the SD media

Opens all the information of the SD stick in a directory structure

Opens the Input menu to search

Opens the search window with a virtual keyboard.

The scroll bar will show you where you are in the list and gives an indication of how

many ﬁles are to be found in the list.

Menu for the Albums

If you have opened the menu for the Albums you will see all albums which are stored like the picture

above.

A short press on the name of an album opens this and all the songs stored in the album are

displayed.

With a further pressure on one of the saved songs will be selected and played.

With an up and down motion, you can browse the songs or albums in the table which is

displayed to you

If you want to browse the contents of the folder, use

the search function in the menu. By pressing the

keyboard icon, the virtual input option will be shown.

Beginning with the ﬁrst letter of a title you can then

browse the contents

Press this button and return back to the previous menu.

Menu for the Artists

If you will open the menu for the performers all stored artist with name will be displayed to you.

A short press on the name of an artist opens up new window with either all albums of the artist

or the stored songs when no album has been deposited

With a further pressure on one of the saved songs will be selected or start to play

With an up and down motion, you can browse the songs or albums in the table

which

is displayed to you.

If you want to browse the contents of the folder,

use the search function in the menu. By pressing

the keyboard icon, the virtual input option will be

shown. Beginning with the ﬁrst letter of a title you

can then browse the contents

Press this button and return back to the previous menu.

Menu for the songs

If you will open the menu for the songs all stored songs with title will be displayed to you.

A short press on the title of a song that is shown to you will start playing the song.

An icon to the left side of the song title will show you what song is currently playing

With an up and down motion, you can browse the songs in the table which is displayed to you

If you want to browse the contents of the folder, use the search function

in the menu. By pressing the keyboard icon, the virtual input option will

be shown. Beginning with the ﬁrst letter of a title you can then browse

the contents

Press this button and return back to the previous menu.

A2DP Bluetooth function

To use the A2DP function you need to have your phone connected to the device and the mobile

phone must support A2DP function.

In the main menu scroll to the page with the source options. Select the icon for A2DP and

apply it by a

short pressure on the menu ﬁeld

: Previous Track

: Next track

: Play / Pause

: Back to main menu

In the window you will ﬁnd the following information about the playing song:

: Artist

: Album

Title

of the track

These are only displayed when the played songs contain this information.

Aux Function

If you attach an external audio source, you can control this only on the connected device. A control

device on the Dynavin is not possible.

To do this, use an adapter to the RCA connectors to the backwards inputs.

In the main menu scroll to the page with the source options. Select the icon for HDD and

apply it by a short pressure on the menu ﬁeld

Back to main menu

Or, brieﬂy press the SRC button on the front of the Dynavin-Unit.

Internal memory

The Dynavin unit has an internal memory where you can store media such as music, pictures or

movies.

In the main menu scroll to the page with the source options. Select the icon for HDD and

apply it by a short pressure on the menu ﬁeld

With an up and down scroll motion, you can search the songs, artists,or playlists in the

displayed table.

Opens all music information on the HDD media

Opens all movie ﬁles on the HDD media

Opens all image formations on the HDD media

Opens all the information of the HDD stick in a directory structure

Opens the Input menu to search

Opens the search window with a virtual keyboard.

The scroll bar will show you where you are in the list and gives an indication of how

many ﬁles are to be found in the list.

Menu for the Albums

If you have opened

the menu for the

Albums you will see

all albums which are

stored like the

picture above.

A short press on the name of an album opens this and all the songs stored in the album are

displayed.

With a further pressure on one of the saved songs will be selected and played.

With an up and down motion, you can browse the songs or albums in the table which is

displayed to you.

If you want to browse the contents of the folder, use

the search function in the menu. By pressing the

keyboard icon, the virtual input option will be shown.

Beginning with the ﬁrst letter of a title you can then

browse the contents

Press this button and return back to the previous menu.

Menu for the Artists

If you will open the menu for the performers all stored artist with name will be displayed to you.

A short press on the name of an artist opens up new window with either all albums of the artist

or the stored songs when no album has been deposited

With a further pressure on one of the saved songs will this be selected or start to play.’

With an up and down motion, you can browse the songs or albums in the table which

is displayed to you.

If you want to browse the contents of the folder,

use the search function in the menu. By pressing

the keyboard icon, the virtual input option will be

shown. Beginning with the ﬁrst letter of a title you

can then browse the contents

Press this button and return back to the previous menu.

Menu for the songs

If you will open the menu for the songs all stored songs with title will be displayed to you

A short press on the title of a song that is shown to you will start playing the song.

An icon to the left side of the song title will show you what song is currently playing

With an up and down motion, you can browse the songs in the table which is displayed to you

If you want to browse the contents of the folder, use

the search function in the menu. By pressing the

keyboard icon, the virtual input option will be shown.

Beginning with the ﬁrst letter of a title you can then

browse the contents

Press this button and return back to the previous menu.

Folder options

The option is used to copy or to transfer ﬁles from storage media to the internal memory.

You can copy the ﬁles only from an SD card which is inserted in the MMC slot into the internal memory.

Touch the button Storage Card.

You get a list of all ﬁles on the card. These are displayed in a folder structure.

Like a PC, you

can now select ﬁles and by the shown keyboard shortcuts you can copy, past, or

delete ﬁles.

Function of the Menu

Ctrl+C

Ctrl+V

Ctrl+A

: Copy ﬁle

: Paste ﬁle

: Choose all ﬁles

: Delete selected ﬁle

: Back to previous menu

: Back to main menu

Copying ﬁles to the internal memory

Select a ﬁle that you would like to copy to the internal memory.

The ﬁle is marked as shown above. If you want you can also select multiple ﬁles. Simply tap to

another ﬁle

Now press Ctrl+C Button then copies the ﬁles you want to transfer.

Now press the Back key until you are in the main menu.

Now select the button Internal memory (HDD).

If you see the directories, you can either choose a subfolder in which the ﬁles are to be stored or

directly into the root directory.

Now press Ctrl+V to paste the ﬁles.

Navigation

To use the Navigation there must be inserted the SD-Card with the software on it to the Navi-Slot on

the front of the navigation system.

It can be used almost any Windows-based navigation on it. Normally Dynavin will preinstall the IGO-

Primo Navigation software and all settings are done already.

If you want to use your own software now or the enclosed from Dynavin SW can not be run, check ﬁrst

of the following settings.

Navigation software path

Go in the main menu to the button labeled Navi Path.

Now click on the icon for the folder.

This takes you to the directory structure of the

navigation map which is inserted into the SD card slot.

there, go now the executive. EXE ﬁle is

needed from the to start.

Depending on the software, this can also be

located in a subfolder.

Touch this ﬁle with your ﬁnger.

The path of the ﬁle should be shown like in the image

as a speciﬁed path now.

Press these button and return back to the

previous menu.

Start up the Navigation software

Now go to the main menu, click the icon for navigation.

You will see when you start the navigation ﬁrst a loading screen is shown

When you start the navigation the ﬁrst time, this may take several minutes to complete.

Also you must set for the ﬁrst time some options of the Navigation software like language time voice

and so on.

Please refer for all of the functions and options of the navigation to the manual for the used navigation

software.

The Navigation Software will be included by Dynavin but is not a permanent part of the device.

Sound Settings

The Dynavin N6 oﬀers a wide range of Settings to adjust the sound conditions at your requirements.

This includes the possibility to set the delay times on the seating position and also the possibility to

activate an original active sound system such as BMW with DSP system.

Please read on the homepage of Dynavin in which vehicle which sound system can be activated

Through a brief touch of the lettering the option is selected.

For some options, you will be taken to a new menu in this you can set more options.

Press this button and return back to the previous menu.

Fader – Balance – Delay

In the menu for fader, balance and delay you can set up the speakers so that they are leveled

perfectly to your position.

Through a brief touch of the arrow representations option will select and change the speciﬁed

value.

When you press a long time on one of the settings, the setting shifts continue automatically.

Use the directional pad displayed on the right side to control the volume of individual speakers.

The arrows indicate the direction in which you move the center.

One press on the circle in the middle of the directional pad centered again the setting.

The displayed crosshair on the vehicle display tells you where the acoustic center is located.

With the shown speakers at each corner of the vehicle, you can set the duration. Once there, you can

set the approximate distance in cm on how far your ear is located away from the speaker.

This can greatly enhance your music experience.

With the No-Delay button you can reset the settings.

Press this button and return back to the previous menu.

Bass – Middle – Treble

In this menu you can adjust the highs and lows of your sound system.

With the four controls you have shown the possibility by simply moving the bass, high and medium-

sound and when you have also connected a subwoofer you can control the subwoofer output.

With an up and down motion scrolling, you can get the scrollbar to the desired position.

To do this, press the scroll bar. If the blue bar turns red you know that the controller is selected

Press this button and return back to the previous menu.

Equalizer

In this menu you have the opportunity to set one frequency in a certain range. You can do in ﬁve diﬀerent

frequency ranges.

But you have also the possibility to select some preset values.

How, for example, Flat, Pop, Classic, rock, or if you can select the User button to make your own

personal setting.

With an up and down motion scrolling, you can get the scrollbar to the desired position.

To do this, press the scroll bar. If the blue bar turns red you know that the controller is selected

Press this button and return back to the previous menu.

Source

In this menu you can set whether the volume level of an audio source when switching the source it´s

automatically adjusted.

If the controller is in the 0 position the volume that is set by the volume control will be assumed. In the

areas above or below 0 the volume is automatically adjusted by this value.

With an up and down motion scrolling, you can get the scrollbar to the desired position.

To do this, press the scroll bar. If the blue bar turns red you know that the controller is selected

Press this button and return back to the previous menu.

Other settings

Conﬁrmation tone : With this option you can set the key conﬁrmation sound.

With the shown controller you can set the volume of the

sound. Touch the scroll bar for this function.

Warning &PDC : This option is just for special cars like BMW E9X and E8X.

If you select this option you can hear warning signal through the

speakers. The warning beep includes seat belt and so on.

Loud : T

This option is to improve the sound reproduction of low frequencies.

The result is that the listener gets the illusion of deep bass reproduction,

even when small loudspeakers are being used.

his option is for turning up the bass and treble to make

the speakers sound a lot louder than normal settings.

Dyna-Bass :

OE DSP AMP :

This option is for cars with an original DSP ampliﬁer, if the car has a

DSP system you can select it to adjust DSP output.

Factory ampliﬁer Hiﬁ :

This option is just for special cars (BMW E46 & BMW E39, E53)

without DSP ampliﬁer system, selecting it can avoid sound distorted if

you adjust the volume to high.

With a slide movement you can bring the controller to the desired position.

DAB

The New Dynavin unit will enable you to connect with other accessories.

Therefore Dynavin has a DAB tuner in preparation that allows you to upgrade your multimedia

device with an external tuner that is developed by Dynavin itself. You can connect it external to

the Unit. This combination allows you to receive and control of the multimedia unit Digital

television.

Please inform yourself on the homepage of Dynavin when this is available.

www.dynavin.com

DVB-T

The New Dynavin unit will enable you to connect with other accessories.

Therefore Dynavin has a DVB-T tuner in preparation that allows you to upgrade your multimedia

device with an external tuner that is developed by Dynavin itself. You can connect it external to

the Unit. This combination allows you to receive and control of the multimedia unit Digital

television.

Please inform yourself on the homepage of Dynavin

when this is available.

www.dynavin.com

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Dynavin N6 Dynavin N6 in the language / languages: English as an attachment in your email.

The manual is 44,06 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Dynavin N6 Dynavin N6

Dynavin N6 Dynavin N6 User Manual - German - 82 pages

Dynavin N6 Dynavin N6 User Manual - Dutch - 32 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Dynavin N6 Dynavin N6 Manual

Product: