667483

Dymo XTL500 Manual

45
Zoom out
Zoom in
Previous page
1/62
Next page
40
XTL
™
500
User Guide
Changing the Auto Shut-off Time
To conserve power, the screen will dim after thirty seconds of inactivity and the
label maker will enter standby mode after three minutes of inactivity. After ten
more minutes of inactivity, the label maker automatically shuts off.
You can change the amount of time the label maker remains in standby mode
before automatically shutting off. Although not recommended, you can also set
auto shut-off to Never.
To change the auto shut-off time
1 From the Home screen, tap and select Auto shut-off.
2 Select the number of minutes until the power is automatically turned off and
tap Done.
Changing the Recall Data Setting
When you switch label applications, data from the previous label can sometimes
be used on the new label. Recalling data applies to text-only labels.
When data recall is possible and the recall data setting is turned on, you are given
several recall options:
Recall once - Recall data from the previous label this one time only. You will
continue to be asked each time data recall is available.
Always recall - Always recall data from the previous label. From now on data
will always be recalled to the new label when possible.
Not this time - Don’t recall data this one time. You will continue to be asked
each time data recall is available.
Never recall - You will never be asked to recall data.
When you choose Always recall or Never recall, you can reverse this setting.
To change data recall
1 From the Home screen, select and tap Recall data.
2 Select Yes or No, and then tap Done.
Setting the Print Options
Several print options are available for printing your labels. You can change the
options each time you print or you can save the options you use most often as
default settings.
The options you can set are:
Print Range
Number of Copies
Collate
Mirror
Cut Labels
Feed
You can change these print options in two ways:
At the time you print labels: the options apply to that one print job.
… 45 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dymo XTL500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dymo XTL500 in the language / languages: English as an attachment in your email.

The manual is 12,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Dymo XTL500

Dymo XTL500 Quick start guide - English - 14 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info