585221

Dymo Rhino 6000 Manual

20
Zoom out
Zoom in
Previous page
1/32
Next page
14
Printing Options
You can choose to print multiple copies of the same
label, collate the copies, pause to cut between labels,
advance the label tape, and adjust the print
contrast.
Printing Multiple Copies
You can print up to 99 copies of the same label at one
time.
To print multiple copies
1. Press # COPIES (SHIFT + PRINT).
2. Press the
S arrow to increase the number of copies
to print. The default is 2 copies.
3. Press the
T arrow to decrease the number of
copies (maximum is 99).
4. Press OK or PRINT to begin printing.
You may notice a brief pause in printing
between each label for more complex formats.
When printing is finished, the number of copies to
print returns to 2.
Collating Multiple Copies
When printing multiple copies of a label file containing
more than one label, all the copies of a label are
printed before the next label starts printing. You can
choose to have the label file print collated, so each
complete copy of the file prints before the second copy
starts. The following example shows three copies of a
label file containing three labels printed normally and
collated.
Normal
A101 A101 A101 A102 A102 A102 A103 A103 A103
Collated
A101 A102 A103 A101 A102 A103 A101 A102 A103
To collate multiple copies
1. Press SETTINGS.
2. Select Collate multi. copies and press OK.
3. Select On.
4. Press OK and then select Done (ESC).
Pausing between Labels
By default the printer pauses after printing each label
so you can cut the label. You can turn this feature off to
have the labels print continuously.
To set the printer to print continuously
1. Press SETTINGS.
2. Select Pause to cut btw labels and press OK.
3. Select Off.
4. Press OK and then select Done (ESC).
Advancing the Label Tape
The default leader space for all labels is approximately
10 mm. To add additional blank space to the
beginning or end of your label, you can feed the tape
in 10 mm increments.
To advance the tape
1. Press FEED (SHIFT + CUT).
2. Press OK to advance the tape.
Adjusting Print Contrast
Depending on the label material you choose, you may
need to lighten or darken the print on the label.
To adjust the print contrast
1. Press SETTINGS.
2. Select Print contrast and press OK.
3. Use the arrow keys to adjust the print contrast.
4. Press OK and then select Done (ESC).
5. Repeat as necessary until you are satisfied with the
print quality.
… 20 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dymo Rhino 6000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dymo Rhino 6000 in the language / languages: English as an attachment in your email.

The manual is 1,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Dymo Rhino 6000

Dymo Rhino 6000 User Manual - German - 33 pages

Dymo Rhino 6000 User Manual - Dutch - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info