585221
13
Zoom out
Zoom in
Previous page
1/32
Next page
7
The hot keys toggle the label type on and off. For
example, if you choose Flag and later want a General
label, just press the Flag key a second time to remove
the Flag settings and return to General label type.
Creating Wire Wrap Labels
You can create several types of labels that wrap around
a cable or wire: vertical wire wrap, horizontal wire
wrap, self-laminating, and flag labels.
Creating Vertical Wrap Labels
A Vertical Wrap label is placed
around the width of a wire or
cable. You can enter up to five
lines of text and the text is
repeated as many times as
possible depending on the size of the text and the
length of the label.
To create a vertical wrap label
1. Press V.WRAP.
2. Enter the diameter of the cable and press OK.
3. Select Done (ESC) to create the label.
To create multiple labels quickly, see Creating a
Series of Labels on page 12.
Creating Horizontal Wrap Labels
A Horizontal Wrap label is
placed horizontally along the
length of the wire or cable. The
label text is repeated as many
times as possible depending on the size of the text and
the width of the tape.
To create a horizontal wrap label
1. Press H.WRAP (SHIFT + V.WRAP).
2. Enter the label length and press OK. Select AUTO to
have the length automatically set to fit the text.
3. Select Done (ESC) to create the label.
To create multiple labels quickly, see Creating a
Series of Labels on page 12.
Creating Self-Laminating Labels
The Self-Laminating label is
designed to be used with RHINO
Self-Laminating Labels (part
number 1734821). The text of the
label is printed on the top portion
of the label so the clear, bottom
half of the label can wrap around and cover the text.
Self-Laminating tape is 24 mm wide; however, you can
only enter two lines of text and are limited to using
extra-extra-small, extra-small, and small font sizes.
To print a self-laminating label
1. Press SELF-LAM (SHIFT + FLAG).
2. Enter the label length or select AUTO to have the
label length automatically set to fit the text.
3. Press OK to create the label.
To create multiple labels quickly, see Creating a
Series of Labels on page 12.
Creating Flag Labels
Flag labels wrap around a wire or
cable leaving the text part of the
label extending out from the
cable. The text on flag labels is
automatically printed on both
ends of the label leaving a blank
space in the middle that wraps around the cable.
When the label is applied to the cable, both ends of
the label are applied back to back leaving a tail or flag.
The result is a label that can be read from both sides.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dymo Rhino 6000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dymo Rhino 6000 in the language / languages: English as an attachment in your email.

The manual is 1,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Dymo Rhino 6000

Dymo Rhino 6000 User Manual - German - 33 pages

Dymo Rhino 6000 User Manual - Dutch - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info