585221
8
Zoom out
Zoom in
Previous page
1/32
Next page
2
Recharging the Battery Pack
The battery pack automatically recharges while the
printer is connected to a power source through the
power adapter. Charging the battery pack for the first
time will take approximately eight hours; recharging
the battery pack will take approximately two hours.
Inserting and Removing the Tape Cassette
Your printer comes with a starter tape cassette. Visit
www.dymo.com for information about purchasing
additional tape cassettes.
To insert the tape cassette
1. Gently lift the tape cassette door on the back of
the printer.
2. Make sure the tape and ribbon are taut across the
mouth of the cassette and that the tape passes
between the guides. If necessary, turn the ribbon
rewind spool clockwise to tighten the ribbon.
3. Insert the cassette with the tape and ribbon
positioned between the guideposts.
Figure 4
4. Press gently on the cassette until the cassette
moves into place. The insertion mechanism will
guide the cassette into place.
5. Close the tape cassette door.
To remove the tape cassette
1. Gently lift the tape cassette door on the back of the
printer.
2. Press the cassette eject button. The tape cassette is
lifted from the printer.
3. Gently remove the tape cassette.
4. Insert a new tape cassette as described above.
5. Reset the tape width as described in Setting the
Tape Width.
Setting the Tape Width
Each time you insert a tape cassette into the printer,
you are prompted to set the tape width so the printer
knows what size label tape you are currently using.
Some of the features you use to design labels are
dependent on the width of the tape.
However, to create a label for a tape width different
than what is currently in the printer, you can set the
tape width from the Settings menu.
To set the tape width
1. Press SETTINGS. The Settings menu appears on the
display.
2. Select Tape Width.
3. Select the width of the label tape currently inserted
in the printer.
4. Press OK and then select Done (ESC).
Selecting a Language
Several language-related features on the printer are
determined by the language setting, such as special
characters, menu text, and so on. By default the
language is set to English.
To select a language
1. Press SETTINGS and select Language.
2. Select the language.
3. Press OK and then select Done (ESC).
Eject Button
Lift
Guide posts
Ribbon rewind
spool
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dymo Rhino 6000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dymo Rhino 6000 in the language / languages: English as an attachment in your email.

The manual is 1,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Dymo Rhino 6000

Dymo Rhino 6000 User Manual - German - 33 pages

Dymo Rhino 6000 User Manual - Dutch - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info