B-105
Appendix B
Troubleshooting
The LabelWriter SE300 printer was designed to give long and
trouble-free service, requiring very little maintenance. You’ll get
the best possible performance from your LabelWriter if you
follow the instructions in Chapter 1 and the procedures described
here. This appendix also covers troubleshooting for printer errors
and other common problems.
Printer Maintenance
Printer maintenance is quick and easy with the
LabelWriter printer. There’s no set schedule for maintenance;
simply perform the appropriate maintenance when you see that
it’s needed.
The LabelWriter printer can be easily cleaned using just a few
simple items. Use these items as often as needed to keep your
printer clean and in good working order. You’ll need these items:
•= lint-free cloth
•= isopropyl alcohol, diluted dishwashing detergent, or
diluted (non-ammonia) glass cleaner
•= small, soft brush, such as a paint brush
Use these items as they are called for in the maintenance
procedures described in this chapter.
Exterior Maintenance
Cleaning the outside of your LabelWriter is as important as
cleaning the inside. Occasionally dusting the outside of the
printer will reduce the incidence of foreign matter getting inside
the printer. Follow these steps to perform exterior maintenance on
your printer:
1. Turn the printer off and disconnect the power cord.
