Manual Dymo LabelWriter SE300 (page 86 of 132) (English)

570778

Zoom out

Zoom in

1/132

4-82

The Caret Feature

Some environments do not allow the user to send the full range of

ASCII characters. The Caret feature is used to resolve difficulties

that may arise because of this.

Activating the Caret Feature

The Caret feature defaults to off on the LabelWriter's. To enable

the Caret feature, set the printer into terminal mode as instructed

in Appendix C and send a carriage return/line feed followed by

the characters ‘C’ and ‘1’. The program below demonstrates this.

OPEN "COM1:9600,N,8,1" FOR OUTPUT AS #1

PRINT #1, CHR$(13); CHR$(10);

PRINT #1, "C1";

Using the Caret Feature

When the caret feature is enabled, a LabelWriter will translate

any 3 digit characters following a caret character (‘^’) as the

number they express. For example, if the characters ^027 are sent

to the LabelWriter, it will interpret them as a single character

with a value of 27 (the Escape character).

When using the caret feature, three digit characters must always

follow the caret (^). Also, while the caret feature is enabled, the

LabelWriter will not work correctly with the LabelWriter EL

Windows or Macintosh print drivers.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Dymo LabelWriter SE300 in the language / languages: English as an attachment in your email.

The manual is 1,06 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Dymo LabelWriter SE300 Manual

Product: