Manual Dymo LabelWriter SE300 (page 18 of 132) (English)

570778

Zoom out

Zoom in

1/132

4-14

EL Mode

The LabelWriter SE300 command sets includes the entire

command set of the LabelWriter EL, as well as the ASCII

commands that will be discussed later. EL mode refers to printing

using the LabelWriter EL printing commands. Because the

LabelWriter EL commands are an inherent part of the

LabelWriter SE300, there are no special commands to switch to

LabelWriter EL emulation. Data may be sent exactly as though it

were being sent to a LabelWriter EL and the LabelWriter SE300

will process it and print correctly.

At its most basic level, a LabelWriter is a direct thermal printer

that creates images on a label by heating the individual elements

of its print head. On a LabelWriter SE300, the print head has 448

elements (or dots). When it prints, some of these dots will be

turned on (heated), and the printer’s motor will advance the paper

by a step. Any thermal paper that is under a heated element will

then turn black. For each motor step, a dot line is printed. By

controlling the length of each step, the LabelWriter can print in

either 203x203 dpi or 203x138 resolution, as a longer step makes

larger dots and therefore results in lower resolution.

Each dot line is a complete object and is printed by the

LabelWriter as soon as it is processed. Because of this, an EL dot

line should not be sent while a portrait object or a landscape page

is being constructed.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Dymo LabelWriter SE300 in the language / languages: English as an attachment in your email.

The manual is 1,06 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Dymo LabelWriter SE300 Manual

Product: