Manual Dymo LabelManager PnP (page 7 of 38) (English, German, Dutch, French)

585229

Zoom out

Zoom in

1/38

Inserting the Label Cassette

Your label maker uses DYMO D1

label cassettes.

To insert the label cassette

1 Open the side cover of the

label maker.

2 Make sure the tape and ribbon are

taut across the mouth of the cassette

and that the tape passes between

the label guides.

If necessary, turn the ribbon rewind

spool clockwise to tighten the ribbon.

3 Insert the cassette and press firmly

until the cassette clicks into place.

See Figure 5.

4 Close the side cover of the

label maker.

Connecting the Label Maker to your Computer

The label maker connects to your computer using the USB connection located on

the back of the label maker. You do not need to install additional software or drivers

to use the label maker with your computer.

To connect the label maker to your computer

1 Plug the USB cable into the USB port on the

back of the label maker. See Figure 6.

2 Plug the other end of the USB cable into an

available USB port on your computer.

NOTE The label maker must be connected to a

powered USB port. The label maker may not charge or function properly when

connected to a non-powered USB port, such as those on some Mac keyboards, or

a non-powered USB hub.

Figure 4

Ribbon

rewind spool

Label

guides

Figure 5

Figure 6

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Dymo LabelManager PnP in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 15,68 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Dymo LabelManager PnP Manual

Product: