743573
35
Zoom out
Zoom in
Previous page
1/46
Next page
ACRO Mixers
Richtingsroer op Rolroer/Hoogteroer
De Richtingsroer Rolroer/Hoogteroer mixer ondersteunt het vasthouden van de vliegkoers
o Mix een percentage Hoogteroer bij indien het vliegtuig de tendens heeft om richting
landingsgestel of cockpit weg te draaien.
o Mix een percentage Rolroer bij indien het vliegtuig bij de mesvlucht wil rollen.
Rolroer op Richtingsroer
Gebruik de Aileron to Rudder-mix om de ongunstige gieringseigenschappen van bepaalde typen vliegtuigen
tijdens het maken van een bocht(zoals vliegtuigen met een hoge vleugel bv. Piper J3 Cub) te overwinnen en de
stuurcoördinatie te vereenvoudigen.
Hoogteroer op Flap
Mix de Hoogteroer op Flap mixer om met de Hoogteroerstuurknuppel de Flaps aan
te sturen bij de mesvlucht ( knife edge ). Dat kan als spoilerfunctie bij 3D vlucht
worden gebruikt. Deze mixer is beschikbaar wanneer kleppen of duale rolroeren in
de vleugelkeuze werden geselecteerd.
Acro Gyro functie
In dit menu kunt u maximaal 4 curven met elk 7 punten programmeren. Dit beidt een ongelofelijk grote
flexibiliteit in de controle van de gyrofunctie die ook stuurknuppel-gecontroleerde versterking (Gain) mogelijk
maakt. (De gyro versterking wordt daarbij steeds minder, hoe verder de stuurknuppel uit het midden wordt
gebracht.)
Zo komt u in het Gyro menu:
1. Kies in de Systeeminstelling het modeltype.
2. Kies rechts onder in het menu het punt Verder. Zo komt u in de keuze van de
opties. Activeer de gewenste gyro-opties. Wanneer de gyro-functie actief is
verschijnt deze in de functielijst.
Programmeren van de gyrocurve:
1. Kies Gyro 1 of Gyro 2 menu-optie uit de functielijst.
2. Kies Vliegtuig- of Helikoptertype van de gyro en kies VERDER.
3. Kies een trimmer of potmeter voor het instellen van de gyro-gevoeligheid:
rechter knop, linker schuif, rechter schuif, linker trimming A, rechter trimming A.
4. Scroll naar UIT > UIT.
. a. Kies het eerste UIT en wijs het ingangskanaal van de gyro toe. Wanneer de gyro voor de ondersteuning van
. de rolroeren wordt gebruikt hier Rolroer kiezen.
. b. Kies het tweede UIT en wijs het uitgangskanaal van de gyro toe, bv. het kanaal voor het landingsgestel.
5. Kies de curve die u wilt bewerken.
6. Voer de gewenste gyrowaarden in op de punten van de curve.
7. Wijs de schakelaarposities voor het activeren van de curve toe. De curve is actief wanneer de box brandt.
Pitchcurve functie
In de Acro mode wordt de pitchcurve gebruikt om een verstelbare propeller aan
te kunnen sturen. er zijn 4 verschillende curven beschikbaar, die via een
schakelaar, knop of de stuurknuppelpositie geselecteerd kunnen worden. Op de
curve kunnen maximaal 7 punten geprogrammeerd worden. Let er op, dat de
pitchcurve aangestuurd wordt door de positie van de gasknuppel.
Activeren van het menu Pitchcurve:
1. Kies in de Systeeminstelling de Vleugelkeuze.
2. Kies in het menu VERDER rechts onder op het display. Activeer in het volgende menu de gewenste functie
Pitchcurve. Wanneer deze functie geactiveerd is verschijnt hij aan het einde van de functielijst.
3. Wijs het pitchkanaal toe in de kanaaltoewijzing, nadat deze in de functie Pitchcurve werd toegewezen.
. Pag 34
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DX9 Spektrum DX9 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DX9 Spektrum DX9 in the language / languages: Dutch as an attachment in your email.

The manual is 2,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info