Manual Dwt-Zelte Cubus (page 23 of 23) (English, German)

626015

Zoom out

Zoom in

1/23

www.dwt-zelte.com

Cubus

Please read these Assembly and Care Instructions completely, be-

fore starting to assemble the tent.

General instructions:

Carry out a trial assembly of the tent so that you are familiar with

the important operations and instruction before actually using the

tent.

We recommend that the assembly is carried out with the assistance

of a second person, since many of the steps described can be carried

out more easily and quickly in this way.

To assemble the tent, you will need a rubber or steel hammer, and

also a tape measure, in order to mark out your pitch on the site and

to differentiate between the tent poles.

Accessories:

The ﬁ xing accessories provided are designed for normal weather

conditions; heavy rain, storms, hail or snow will necessitate addi-

tional ﬁ xing accessories, such as guy-ropes for supporting the tent

in stormy weather, and ground pegs and tent pegs for more stable

attachment to the ground.

Choosing a site:

Choose a level site wherever possible, free of stones and any sharp

objects, in order to avoid damage to the tent fabric.

Remember that resin from trees and pollen from ﬂ owers can also

damage the fabric of the tent, and avoid such locations wherever

possible.

Pitch the tent so that the entrance is sheltered from the wind.

Care:

If the tent is to be sited on damp ground, use a groundsheet in order

to prevent the fabric from getting dirty. After use, the tent should

always be packed away in a dry condition, or at least laid out to dry

within 12 hours at the latest, in order to prevent the formation of

mould. The poles should be cleaned of dirt after use, and stored

separately from the tent skin.

Do not clean the tent using chemical cleaning agents or caustic

materials. Simply allow the tent to dry and then brush the dirt out.

The plastic windows should be cleaned only with clean water and a

soft cleaning cloth.

The zip fastenings will continue to operate smoothly if lubricated

with a normal zip fastener spray.

GENERAL:

Check the tent ﬁ xing regularly to avoid damages caused by wind. Use

all possible tension possibilities to make sure that the tent is set up

correct and save. Window ﬂ aps and doors should always be rolled

up inward, so that water can run off and does not collect within

the rolled-up fabric. Close doors and windows when wind becomes

stronger that the wind cannot blow up your tent.

Temperature variations may cause the fabric to shrink or expand

slightly. These natural properties mean that the pitching of the tent

should be checked regularly and adjusted when necessary.

Temperature variations and natural evaporation from the ground

can lead to the formation of condensation. This effect is not due to

lack of sealing integrity, and can be minimised by means of adequate

ventilationor a airtight groundsheet.

Fire precautions:

In order to camp safely, please follow these simple rules: Never place

or use any cooking equipment or open lighting equipment close to

the walls, roof or curtains of the tent, since the fabric is inﬂ ammable.

Always observe the safety instructions relating to this equipment.

Do not allow children to play in the immediate vicinity of such equip-

ment when it is switched on. Always leave clear an exit route from

the tent. Familiarise yourself with the ﬁ re safety equipment and pre-

cautions applicable on the camping site, or obtain these instructions

from the site management.

Service and Guarantee Card:

Our products are subject to the normal legal guarantee period.

During this period, we will correct any faults which are due to mate-

rial or manufacturing defects and which signiﬁ cantly affect the func-

tionality or serviceability of the equipment. We reserve the right to

repair or replace any faulty parts at our own discretion.

All further claims are excluded. The guarantee does not cover dama-

ge caused by failure to observe the Assembly and Usage Instructions

or improper use, nor does it cover normal wear and tear, effects

of the weather, or minor faults which do not signiﬁ cantly affect the

functionality or serviceability of the equipment. The guarantee is in-

valid if the equipment has already been repaired or handled by third

parties. On presentation of proof of purchase, and taking into ac-

count the above exceptions, repairs will be carried out free of charge

within the guarantee period exclusively by our Service Department.

Any other pertaining agreements must be made in writing.

Please visit us on our website:

www.dwt-zelte.com

There we offer you more speciﬁ c information regarding each model.

Or write us an e-mail if you have an idea that you think we should

have a closer look at.

Dieter Winneknecht GmbH

Harzweg 11

D-34225 Baunatal

Germany

info@dwt-zelte.com

Assembly and Care instruction

Important product information!

Ultraviolet radiation reduces the tear strength of all tents fabrics

during their times of use.

Polyester fabric stands it better than nylon but also does not last

forever and cannot defy the effect of nature.

UV-radiation is stronger in the southern than in northern countries.

Therefore avoid permanent intensive sunlight for extended periods

of time.

dwt-Zelte will not assume any liability for damage that are caused

by uv-lights.

Temperature variations and natural evaporation from the

ground can lead to the formation of condensation. This effect is not

due to lack of sealing integrity, and can be minimised by means of

adequate ventilationor a airtight groundsheet.

Moist packed canvas can cause colour fading. Both characters are

no reasons to complain. Be aware that the tent is well ventilated

and dryly packed. Store the tent in a dry room. Separate the frame

from the canvas.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Dwt-Zelte Cubus in the language / languages: English, German as an attachment in your email.

The manual is 0,58 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Dwt-Zelte Cubus Manual

Product: