732846

Duux DXPU03 Manual

7
Zoom out
Zoom in
Previous page
1/43
Next page
1312
Ionizer
This device comes with a built-in ionizer. The
ionizer released negative ions to capture tiny
airborne particles and pull them inside the lter.
The ionizer is ON by default and can only be
switched o by using a mobile device connected to
the WIFI mode.
Night mode
Once the device is set in auto mode, the LED
indicators and display will automatically turn o
after 10 minutes. Press any button to reactivate the
controls and display.
the lter depends on the air quality and usage of
the device (approx. 4-6 months (art. no. DXPUF03)
Note: Please dispose used lters as non-
combustible garbage.
PM2.5 laser sensor
The PM2.5 laser sensor is situated inside the
handle on the back-side of the device. To remove
dust from the sensor, use a vacuum cleaner with
soft brush extension to gently clean the sensor.
Maintenance before storage
Switch o the device and remove the plug from
the wall outlet
Cover the device with a plastic bag, and keep
in a dry place. Always store it upright as
placement in a at or reverse manner may
cause a fault to the device.
Spare parts
Spare parts and accessories can be requested at
the point of purchase or local distributor
EN
Search for “Tube” and press to continue
Connect to your preferred WiFi network and
enter the corresponding password
Follow the instructions in the app to complete
the pairing process.
Ambient light sensor
The ambient light sensor will automatically adjust
the brightness of the LCD screen according the
ambient light. No manual operation is required.
Filter
The HEPA lter cleans the air from smaller
particles. The activated carbon lter removes
harmful gases and toxics such as smoke,
chemicals, VOC’s and bacteria’s
PM2.5 laser sensor
The pollution degree of the air is sensed by the
sensor, and the pollution condition is displayed by
means of the indicator light of air pollution degree.
In the AUTO speed mode, the device automatically
selects the optimal speed according
to the pollution degree. Sensed pollutants: PM2.5,
dust, pollen, mold, pet dander. PM2.5 is measured
in microgram per cubic meter, shown on the
display as ug/m³
Important: Be sure to remove the power plug
from the outlet before carrying out maintenance.
Important: Do not soak or immerse the power
plug or the device in water.
Important: We recommend weekly
maintenance for optimal eciency.
Cleaning
• Please use soft dry cloth to wipe dust o the
body; If the surface is too dirty, it is better to wipe
it clean with a damped cloth mixed with neutral
detergent.
• Don’t use gasoline, thinner and any others
chemical substances as it will easy damage the
surface.
Pre-lter
To remove large dust particles on the pre-lter
body, use a vacuum cleaner with soft brush
extension to gently clean the surface.
HEPA- and activated carbon lter
The lter replacement indicator will let you know
when it’s time to replace your lter. The lifespan of
4. Maintenance
replacement
1
2
4
3
2
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Duux DXPU03 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Duux DXPU03 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 19,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info