Manual Duux DXMA10 North (page 8 of 53) (English, German, Dutch, French, Spanish)

773947

Zoom out

Zoom in

1/53

1514

Note: In Night mode, the display will

automatically dim after a few second. Press any key

to reactivate the control panel.

Note: To prolong the lifespan of the compressor,

please wait at least 3 minutes before re-switching on

the device after switching it OFF.

Note: The cooling system will switch o if the

ambient temperature is lower than the set one.

However, the ventilation keeps operating on the set

level. If the ambient temperature rises above the

selected level, the cooling will return to work.

the remote control. You can set the hours by

pressing the “+” or “-“ buttons.

Swing function

After air conditioner turns on, press this key on the

remote control to automatically swing the louver

up and down. By pressing this button again the

swing will stop and the louver will remain in that

position. When the air conditioner is turned OFF,

the louver will automatically close again.

Night mode

When pressing the Night mode button in cooling

mode, the set temperature will increase with 1⁰C

after an hour, another 1⁰C after two hours and

then stays at that temperature. Press the Night

mode button again to cancel the setting.

In Night mode, the ventilation will remain at low

speed. By pressing the Night mode button again,

the ventilation speed will return to the previous

setting.

Note: The unit will shut down automatically

when Night mode is running for more than 12 hours

Note: The night mode is not available while

the machine is operatinng in Dehumidication or

Ventilation mode.

Power switch

Press the ON/OFF button and the unit will start

in cooling mode. The pre-set temperature is

25⁰C on medium fan speed. Only when unplug-

ging the device will it go back to the pre-set

settings.

To turn the unit o press the ON/OFF button

again. When the device is turned ON/OFF using

the power button, it will remember the last

setting except timer. Timer is cancelled after

power o and will not be remembered.

Note: The display window shows the ambient

room temperature from 0⁰C to 50⁰C.

Select operation mode

Press the button to select the preferred

operation mode: cooling, dehumidifying or fan.

Cooling mode

When the air conditioner is in cooling mode, it

cools the room. The compressor is then switched

on. When the air conditioner has reached the

desired temperature, it will switch to ventilation

mode. Press the button till the icon lights

up. Press the “ - ”or“ + ”buttons to select a desired

room temperature. The temperature can be from

16℃ to 31℃. Press the button to select wind

speed.

Dehumidifying operation

In dehumidifying mode the device will turn on the

compressor and starting dehumidifying the room.

Press the button till the icon lights up. The

wind will stay in low speed in dehumidiying mode.

Ventilation mode

In ventilation mode, the air conditioner will only

ventilate. It circulates the air in the room, which has

a cooling eect. The compressor will not switch on

in this mode. Press the button to select wind

speed between 1, 2 or 3.

Setting the timer

The timer can be used to automatically activate

the air conditioner between 1 and 24 hours.

This function can only be activated with the air

conditioner is turned OFF. Press and hold the

SLEEP/TIMER button, or press the timer button

on the remote control to activate a delayed

start of the device. You can set the hours by

pressing the “+” or “-“ buttons. When turning

the timer o, press and hold the Sleep/Timer

button again and turn the display to “0”.

The timer can also be used to automatically

shut the air conditioner OFF. This function

can only be activated when the air condition

is turned ON. Press and hold the SLEEP/

TIMER button, or press the timer button on

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Duux DXMA10 North in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 46.73 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Duux DXMA10 North Manual

Product: