773967

Duux DXHU11 Beam Manual

5
Zoom out
Zoom in
Previous page
1/43
Next page
98
C
°
%
1 2 4 6 8H
EN
3. Functions
Power
Increase mist output
Decrease mist output
Auto mode
Timer
Ambient light / WIFI mode
1
2
3
4
1
2
3
4
5
6
Temperature (°C) / Humidity (%) display
Power indicator
Rell water indicator
Auto mode indicator
Mist output level bars
WIFI indicator
Timer indicator
Ambient light indicator
Timer hour(s) indicator
1
2
3
4
5
6
7
8
9
Control panel /
remote control
Display
5
6
1
2
3
4
5
6
7
8
9
Auto mode
Press the button to activate the self-regulating
hygrostat. The mist output intensity will now
self-regulate according to the ambient relative
humidity. Press multiple times to change the
desired humidity in the following order: 40% > 45%
> 50% > 55% > 60% > 65% > 70% > 75% > 80% >
85% > 90% > ACTUAL HUMIDITY > 40% > 50% > ...
and so on. Each press will increase with 5%. Once
released, the selected humidity will blink 3 seconds
to conrm your choice.
When the hygrostat is set above the actual
humidity, the device will operate in high speed until
the desired humidity has been reached. When
the hygrostat is set below the actual humidity, the
device will not humidify. After setting the hygrostat,
the display will show the ambient relative humidity.
Timer
Press the key to activate the timer setting. With
every touch the timer will increase with one hour
in the following sequence: 1h > 2h > 4h > 6h > 8h >
OFF. Once the timer is activated, the device will
automatically shut down after the set timer has
been completed.
Power
Press the power button to switch on the device.
The corresponding indicator will light up on the
display and the ambient light will switch on. The
WIFI indicator will blink to look for devices to
pair. The monitoring screen will show the actual
temperature and humidity every 5 seconds. Press
again to switch o the device (the device will
remain in stand-by mode until the plug is removed
from the wall outlet). The default humidity setting is
MEDIUM output.
Note: you can also switch on the device with
the touch button on the device, located behind the
control panel / remote control.
Increase /
decrease mist output
Press the button increase the mist output.
The mist output level bars will change accordingly.
Pressing the button will decrease the mist
output. The are three mist output levels:
LOW , MEDIUM ,
HIGH
Note: The mist output setting will not cycle
when pressing or button multiple times.
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Duux DXHU11 Beam at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Duux DXHU11 Beam in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 4.2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info