Manual Duux DXCH05 (page 6 of 46) (English, German, Dutch, French, Spanish)

732734

Zoom out

Zoom in

1/46

1110

Heating mode setting

This heater is also equipped with 3 intelligent

modes called HOME, OFFICE and CABIN. The

dierent modes can be activated by pressing

button.

Note: Current date and time need to be set

before using the intelligent heating modes. Please set

the time according above Date/Hour/Minute setting

steps.

Home mode setting

The default high temperature value is set at 23°C

and low temperature at 18°C.

Note: There are 4 periods (P1,P2,P3,P4) in this

mode:

P1: 08:00-16:00 18°C

P2: 16:00-23:00 23°C

P3: 23:00-06:00 18°C

P4: 06:00-08:00 23°C

The pre-set temperature will follow the same

cycle every day. The desired temperature can be

adjusted at all times but will return to the default

value in next cycle. For example; the current time

is 9:00 and the desired temperature is set to 20°C.

The temperature will stay in 20°C from 9:00 to

16:00 and will return back to 18°C the next day.

Remote control

Note: This heater is equipped with a remote

control, which can be used in the same way as the

control panel on the side of the product.

First remove the insulating paper which covers

battery before using the remote control. Follow

below instructions:

Remove the battery bracket from back of

remote control like gure A.

Remove the insulating paper that covered

battery like gure B.

Insert the battery bracket into remote control

like gure C.

Note: Please use this remote control within 6

meters distance, please make sure the control angle

is within 30 degrees.

Hour setting

The current hour can be set by pressing the timer

button, which shows the number 23 and the

symbol will blink on display. The time can be set

by pressing and , after which the display will

show the dierent hours from 00 to 23. When the

hour setting is completed, press the timer setting

button to enter the minute settings. The display will

keep blinking for 7s if no button is pressed.

Minute setting

After nishing the hour setting, the program will

automatically enter into minute setting and the

number 30 and on the display will ash. The

correct minute can be set by pressing and

, after which the display will show the dierent

minutes from 01 to 59. When the minute setting

is completed, press the button to complete the

time setting and to enter normal mode. The display

will keep blinking for 7s if no button is pressed.

Note: If no buttons are pressed for 7 seconds

then the product will go back to its setting. Only

when the correct hour and minute have been

conrmed, will the dierent operation modes

function accordingly.

Normal operating mode

In the normal operating mode the temperature

can be adjusted according to the preferred

temperature by pressing or button. The

product can be used with a temperature will range

of 15°C to 36°C.

Timer setting

The product can automatically shut down by using

the timer function. When the product is turned on,

press the button for 3 seconds to activate the

timer shut down function. The display will show 00

and . The time can be set by pressing and ,

after which the display will show the dierent hours

from 00 to 23. For example; 02 means that the

product will automatically shut down after 2 hours.

The product can also automatically turn on by

using the timer function. When the product is

in standby mode, press the button to set the

desired timer and follow to same steps as with the

timer shutdown.

Note: If you switch to other modes (HOME/

OFFICE/CABIN), the timer setting will be cleared

automatically.

B C

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Duux DXCH05 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 8,6 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Duux DXCH05 Manual

Product: