732733
7
Zoom out
Zoom in
Previous page
1/46
Next page
1312
Oce mode setting
The default high temperature value is set at 23°C
and low temperature is 18°C.
Note: There are 4 periods (P1,P2,P3,P4) in this
mode:
P1: 07:00-12:00 23°C
P2: 12:00-14:00 23°C
P3: 14:00-17:00 23°C
P4: 17:00-07:00 18°C
The pre-set temperature will follow the same
cycle every day. The desired temperature can be
adjusted at all times but will return to the default
value in next cycle.
Cabin mode setting
The default high temperature value is set at 23°C
and low temperature is 18°C.
Note: There are 2 periods (P1,P2) in this
program:
P1: 08:00-23:00 23°C
P2: 23:00-08:00 18°C
The default temperature will stay on for a cycle of
30 days, after which the temperature will go down
to a continuous 18°C. The default temperature can
be adjusted and will last of one cycle of 30 days
Important: Be sure to remove the power plug
from the outlet before carrying out maintenance.
Warning: Allow the heater to cool down before
cleaning it.
Note: In case of malfunction or doubt, do not try
to repair the heater yourself, it may result in a re
hazard or electric shock.
Cleaning
Wipe the exterior surface of the heater occasionally
with a soft damp cloth (not dripping wet) and dry
the exterior surface before operating the heater.
Warning: Do not immerse the heater in
water. Do not use any cleaning chemicals such as
detergents and abrasives. Do not allow the interior
to get wet as this could create a hazard.
Storing
To store away the heater, put the heater back into
its original package and store it in a clean dry place.
Spare parts
Spare parts and accessories can be requested at
the point of purchase or local distributor.
4. Maintenance
and will return to the default value in next cycle.
The 30 days cycle can be adjusted to a shorter time
frame pressing the timer button for 5s. The default
day 1 will begin to ash. Press + or – to increase
the requested day in the 30 day cycle. For example;
change the day to 14 to run the Cabin mode for 16
days instead of 30. When the desired start day is
set, conrm this by the pressing timer button again
or leave it untouched for 3s.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Duux DXCH03 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Duux DXCH03 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 8,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info