732723
4
Zoom out
Zoom in
Previous page
1/27
Next page
76
Installing the product
Place the mount on the base of the product,
slightly turn counterclockwise to lock into the
base and tighten with the locking ring on the
bottom side.
Attach the fan blades to the motor.
Use the plastic screw to secure the fan blades.
Note: turn the screw anticlockwise rmly to
secure it.
Place the rear grill over the motor and tighten
with the locking ring.
mount
base
locking ring
OPENCLOSE
OPENCLOSE
OPENCLOSE
OPENCLOSE
2
Fit the front grill and rotate it a little, clockwise,
until the arrow on the grill lines up with the
left-side marker.
Fit the supplied screw to the underside of the
grill and connect the two halves rmly together.
OPENCLOSE
Installing the remote control
Remove the lid
Place the battery according to the instructions
on the lid with the correct polarity
Close the lid
Note:
• Only use 1x CR2025 3V batteries
• Non-rechargeable batteries are not to be
recharged
• Exhausted batteries are to be removed from the
remote control and safely disposed of
• If the remote control is to be stored unused for a
long period, the battery should be removed
• The supply terminals are not to be short-circuited.
1
2
3
Keep children away from playing with the device.
Do not pull the unit along by the cord.
If the supplied power cord is damaged it must be
replaced by an electrician or qualied person to
avoid any hazard.
The mains supply must conrm to the
specication shown on the rating label on the
back of the device.
Close doors and windows for optimal eciency.
Keep curtains or blinds closed during the
sunniest hours of the day.
Do not turn on the device if you have discovered
damage to the appliance, cord or plug or if the
device is malfunctioning or if there are signs of
any other defect. Return the complete product to
the point of purchase or to a certied electrician
for inspection and/or repair. Always ask for
original parts. The device (incl. cord and plug)
may only be opened and/or repaired by properly
authorized and qualied persons.
Only a licensed professional is allowed to
dismantle or modify the device.
This device is to be used only for its prescribed
purpose. Any other use is deemed to be a
cause of misuse. The user/operator, not the
manufacturer will be liable for any damage or
injuries of any kind caused as a result of this.
1
3
4
5
6
EN
Note: make sure that the grooves in the fan
blades are slid over the pins
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Duux DXCF03 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Duux DXCF03 in the language / languages: English, Dutch, French, Spanish as an attachment in your email.

The manual is 9,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info