Manual Duux DXAW03 Motion (page 5 of 39) (English, German, Dutch, French, Spanish)

773973

Zoom out

Zoom in

1/39

can set the hygrostat in the range between 40%

and 70%. With every touch it will increase with 10%

in the following order: 40% > 50% > 60% > 70%

> CO (continuous). Using continuous mode will

deactivate the hygrostat and the device will run

at continuous speed. When the hygrostat is set

above the actual humidity, the device will operate

in high speed until the desired humidity has been

reached. When the hygrostat is set below the

actual humidity, the device will not humidify. After

setting the hygrostat, the display will show the

ambient humidity.

Timer

Press the button to activate the timer setting.

With every touch the timer will increase with one

hour in the following sequence: 1h > 2h > 3h > 4h

> 5h > 6h > 7h > 8h > 9h > 10h > 11h > 12h

> 00h (o). Once the timer is activated, the device

will automatically shut down after the set timer has

been completed.

Night mode

Press the button to activate night mode. Once

pressed, the LED matrix display will show “ZZZ” for

5 seconds. In night mode, all buttons are disabled

except the night mode and power button. The

device will operate in SL (slow) speed mode.

Power

Touch the button to switch on the device.

After turning on the device, the LED matrix display

will light up for 1 second and shows “Hi!” for 2

seconds after which it will display the current

status followed by the ambient humidity. When

you turn on the device for the rst time, it will

activate medium wind speed and turn to low

wind speed after 3 seconds. The humidication

setting will remain active. Touch the POWER button

again to put the device in stand by followed by a

conformation beep. The LED matrix will show “OFF”

and turn o the device in 2 seconds.

Humidity output / wind

speed

When you turn on the device for the rst time,

it will activate medium wind speed. Touch the

button to switch between wind speeds. The LED

matrix display will show the corresponding wind

speed in SL (slow), LO (low), MI (medium) and HI

(high).

Hygrostat

Touch the button to set the desired ambient

humidity. When you turn on the device for the rst

time, the continuous mode will be activated. You

Press the button again to deactivate night

mode. The LED matrix display will show “ZZZ”

and go back into normal operation mode according

to the hygrostat setting.

Dry run protection

After turning on the device it will check for 1

second if there is sucient water remaining in the

water tank. In case of lack of water, the device will

activate dry run protection mode and the motor

will stop working. The LED matrix display will show

“NO!” and “Lo” alternating every second. In this

mode, all buttons are disabled except the power

button. Please turn o the device, ll the water

tank and press the power button to switch on the

device again.

Note: It may take a couple of seconds before

the water from the water tank lls up the water

tray. You will hear a water dripping sound, which is

normal. Once the device has recognized the water

tray is lled, it will start operating.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Duux DXAW03 Motion in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 7.46 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Duux DXAW03 Motion Manual

Product: