787513
4
Zoom out
Zoom in
Previous page
1/66
Next page
EN 02
Electricity and heat
• Prior to use, check that the mains voltage is the same as the mains voltage stated
on the device.
• Make sure your hands are dry before touching the device, power cord / plug.
Insert the power plug into an electrical outlet that is easily accessible at all times
and a socket designed for 2 round pins (Types C, E, F, J, K and L).
Do not operate the device using an external time switch or a separate remote
control system.
• WARNING! Never cover the device & power cord with cloths, curtains or
any other material to prevent overheating and possible re hazards.
To reduce or prevent the risk of personal injury, electrical shock, re or damage;
never insert metal objects into any openings of the device, power cord or power
socket.
When removing the power plug from the electrical outlet, always pull the power
plug, never pull the cord.
• Check the power cord regularly for damage.
Never use the device if the power cord shows signs of damage, if the device has
fallen on the ground or shows any other signs of damage.
Remove the power plug from the socket when the device is not in use or is being
cleaned.
• Make sure the power cord cannot be trodden on or pinched.
Do not allow the power cord to hang over sharp edges and keep it away from hot
objects and naked ames.
• When plugging in the power cord, make sure people cannot accidentally pull it out
or trip over it.
Remove the power cord from the power socket during lighting storms or if unused
for long periods of time.
This device is a Class ll or double insulated electrical device. As a result, it does
not need to be electrically earthed.
Batteries and heat
• Make sure the remote control battery compartment is secured.
• Only use batteries specied in the battery compartment (CR2025 / 3V).
• Make sure you respect the polarity when placing batteries.
• Do not short-circuit contacts inside the battery compartment or any batteries.
To avoid leakage, remove the battery if the remote control is not used for a long
period of time.
• Empty batteries should be removed from the remote control to avoid leakage.
If the battery leaks, do not allow battery uid to come into contact with the skin or
eyes. If contact has been made, wash the affected area with copious amounts of
water and seek medical advice.
• Keep batteries out of the reach of children.
Do not expose the remote control to excessive heat sources like fire or direct
sunlight (including ampliers).
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dutch Originals DO-SV-BTSB6-B Soundbar at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dutch Originals DO-SV-BTSB6-B Soundbar in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1.08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info