787508
9
Zoom out
Zoom in
Previous page
1/40
Next page
position, the LED indicator light 4 will no longer light up.
• Then remove the power plug from the mains power.
Low heat mode
To warm up the room slowly, turn the power / mode knob 5 to the low heat position “1”.
The device will warm up the room at low heat mode. With the adjustable thermostat knob
6 you can adjust the temperature setting. When the set temperature (thermostat) is
reached, the LED indicator light 4 will no longer illuminate and the heating will stop. Once
temperature (thermostat) is lower than set, the device will heat again and the LED indicator
light 4 will illuminate.
High heat mode
To warm up the room quickly, turn the power / mode knob 5 to the high heat position “2”.
The device will warm up the room at high heat mode. With the adjustable thermostat
knob 6 you can adjust the temperature setting. When the set temperature (thermostat) is
reached, the LED indicator light 4 will no longer illuminate and the heating will stop. Once
temperature (thermostat) is lower than set, the device will heat again and the LED indicator
light 4 will illuminate.
Thermostat
With the adjustable thermostat knob 6 you can adjust the temperature setting.
Increase the thermostat temperature setting by turning the adjustable thermostat knob 6
clockwise.
Decrease the thermostat temperature setting by turning the adjustable thermostat knob 6
counter clockwise.
When the set temperature (thermostat) is reached, the heating will stop and the LED
indicator light 4 will no longer illuminate.
Once temperature (thermostat) is lower than set, the device will start to heat again, and the
LED indicator light 4 will illuminate.
Tip over switch
The device is equipped with a tip over switch (fall protection) that switches o󰀨 the device
if the device should fall over unexpectedly or when the device is lifted. When the device is
lifted or has fallen over, the device will stop working.
• Before you lift or move the device, or if it has fallen over, turn the power / mode knob 5
to the “OFF” position, unplug the device from the mains power and allow the device to cool
down fully (± 30 minutes).
• Check the device for damage. In case of damage or abnormal functioning, stop using the
device.
4) CLEANING AND MAINTENANCE
• Clean the device regularly
• Switch the power / mode knob to the “OFF” position, remove the plug from the mains
power and allow the device to cool down fully (± 30 minutes).
• Never immerse the device in water or any other liquid.
• Clean the power cable and device with a damp cloth.
• Check the air inlet and air outlet of the device for dust and dirt. Remove dust and dirt
EN 07
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dutch Originals DO-CH-HTP01-B at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dutch Originals DO-CH-HTP01-B in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0.52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info