725662

Dutch Originals DO-CH-ACON120 Manual

9
Zoom out
Zoom in
Previous page
1/74
Next page
to be exposed to any substance which may corrode refrigerant containing components,
unless the components are constructed of materials which are inherently resistant to being
corroded or are suitably protected against being corroded.
Checking electrical devices
Repair and maintenance of electrical components shall include initial safety checks and
component inspection procedures. If a fault exists that could compromise safety, then
no electrical supply shall be connected to the circuit until it is satisfactorily dealt with. If
the fault cannot be corrected immediately, but it is necessary to continue operation, an
adequate temporary solution shall be used. This shall be reported to the owner of the
equipment, so all parties are informed.
Initial safety checks shall include:
- The capacitors are discharged: this shall be done in a safe manner to avoid possibility of
sparking.
- That no live electrical components and wiring are exposed while charging, recovering or
purging the system.
- That there is continuity of earth bonding.
WARNING!
- Install the device in rooms which exceed 12 m².
- Do not install the device in a place where inammable gas may leak.
NOTE!
The manufacturer may provide other suitable examples or may provide additional
information about the refrigerant odour.
3) INSTALLING AND USING THE DEVICE
First use
Open the packaging carefully before taking out the device. Make sure the device is
complete and undamaged. If any components are missing or damaged, contact the vendor
and do not use the product. Retain the packaging or recycle it in accordance with local
regulations.
• Remove all packaging from the device.
• Clean the device with a damp cloth. Please refer to the
'cleaning and maintenance’ section.
• Continue with the procedure in the 'using the device' section.
Using the device
Place the device on a rm and solid surface, in an area with at
least 50 cm of free space around the device, generating a proper
air circulation.
Do not operate the device close to walls, curtains or other objects
that might block the air inlets
6
and air outlet
2
, resulting in a bad
air circulation.
WARNING! If the device has a slanted position of more than 45°, allow it to stand
upright for at least 24 hours before use.
Ensure that the device does not come into contact with heat sources, such as radiators,
hot hobs or naked ames.
EN 07
… 9 …


Need help? Post your question in this forum.

Forumrules
1

Forum

dutch-originals-do-ch-acon120

Reset search

  • I am using this product and its brand new but it is giving a constant loud noise when switched on. How to fix this irritating noise? Thanks Submitted on 21-2-2022 at 16:23

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dutch Originals DO-CH-ACON120 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dutch Originals DO-CH-ACON120 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 11,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info