787499
10
Zoom out
Zoom in
Previous page
1/44
Next page
I II III IV
EN 08
• Press the POWER button C on the control panel 3 to put the device in standby mode,
remove the power plug from the mains power.
• Remove the front panel 5 I.
• Remove the Pre Filter 6, HEPA lter 7 and Carbon lter 8 from the device II.
• Detach the Pre Filter 6 from the HEPA lter 7.
• To clean the Pre Filter 6, use a clean rag to absorb the surface dust on the lter mesh.
If the lter is extremely dirty, use tap water to rinse the lter. Fully dry the lter mesh before
placing it back in the device.
• To clean the HEPA lter 7 and Carbon lter 8, use a clean rag to absorb the surface
dust on the lter. If the lters are extremely dirty, attach the crevice tool to the hose of your
vacuum cleaner and vacuum both sides of the lters.
Attach the Pre Filter 6 to the velcro side of the HEPA lter 7.
• Place the lters in the device III, observing the correct sequence: Carbon lter 8, HEPA
lter 7 and Pre Filter 6.
• Place the front panel 5 back on the device IV and click it into place.
Replacing the lters
• Press the POWER button C on the control panel 3 to put the device in standby mode,
remove the power plug from the mains power.
• Remove the front panel 5 I.
• Remove the OLD Pre Filter 6, HEPA lter 7 and Carbon lter 8 from the device II.
Attach the NEW Pre Filter 6 to the velcro side of the NEW HEPA lter 7.
• Place the NEW lters in the device III, observing the correct sequence: Carbon lter 8,
HEPA lter 7 and Pre Filter 6.
• Place the front panel 5 back on the device IV and click it into place.
Cleaning the device
• Clean the device regularly.
• Press the POWER button C on the control panel 3 to put the device in standby mode,
remove the power plug from the mains power.
• Never immerse the device in water or any other liquid.
• Clean the power cable and device with a damp cloth.
• Check the device’s air outlet for dust and dirt. Remove dust and dirt carefully by
vacuuming (vacuum cleaner) the dust and dirt from the air inlet and outlet (open grid).
• Never use aggressive or abrasive cleaning materials, a scouring sponge or steel wool;
these damage the device and will scratch and damage the surface of the device.
• Thoroughly dry the power cable and device.
• Store the device in a dry place.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dutch Originals DO-CE-APFH01-W at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dutch Originals DO-CE-APFH01-W in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 4.18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info