650091

Duronic HV120 Manual

4
Zoom out
Zoom in
Previous page
1/23
Next page
6 7
General Safety Assembly
Electrical Safety
To Use
- Do not cover, restrict the air inlet/outlet or use the appliance to dry clothes.
- Do not use without feet attached.
- Only use in the upright position on a at level surface.
- Make sure that children and pets are closely supervised when the heater is
in use.
- Do not use the appliance near ammable or heat sensitive items
- Do not position directly next to power sockets, shelving or other obstructions
to airow.
- Do not use the heater in the immediate surroundings of a bath, a shower, or
a swimming pool.
- This appliance is not intended for use by persons (including children)
with reduced physical, sensory or metal capabilities, or lack of experience
and knowledge, unless they have been given supervisions or instruction
concerning use of the appliance by a person responsible for the safety.
NOTE
- For maximum benet, close windows and doors when the heater is in use.
- Do not cover the ventilation holes as this will cause overheating and will
activate the cut out.
- Carefully turn the radiator on it’s side to t the feet
- Position each foot as shown in g1. and secure using the self tapping screws
provided
- Two screws are required for each foot and this unit must not be used without
the feet rmly attached.
- Turn the heater to the “OFF” position before plugging in.
- The operating temperature is selected by a combination of the heater
switches and thermostat. The hottest setting will be when the heater switches
are both on and the thermostat is turned to “Maximum”.
- To determine the correct working temperature for your conditions, turn the
heater to “High” and the thermostat to “Maximum” when the room has reached
the required temperature turn the thermostat slowly to the left until the
temperature is off. The temperature will now be kept constant.
- If you want to lower the operating temperature select the heater switch only
and repeat the above procedure.
- The heater is tted with an automatic cutout in the event that it overheats.
If this activates, turn the heater to the off position and unplug. Allow the
heater to cool and remove anything restricting the airow before using the
heater again. If the automatic cut out operates repeatedly contact a quantied
electrician for advice.
- For indoor use only.
- Switch off and unplug when not in use.
- Do not use if the cord is damaged.
- No not use heater in humid or wet environments
- If the appliance cord is damaged, it must be replaced by an electrician or
similarly quality person to avoid hazard.
Thermostat
Fan Switch
||: 1250W
|: 750W
DO NOT plug the heater into an extension lead or adapter as the heater is too
powerful. Using an extension lead or adapter with the heater is a fire hazard and
may cause damage to the device the the user.
… 4 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Duronic HV120 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Duronic HV120 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 0,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info