Manual Duronic BPM150 (page 25 of 134) (English, German, French, Italian, Spanish)

650038

25

Zoom out

Zoom in

Previous page

1/134

Next page

25

Table 2 Guidance and MANUFACTURER’s declaration – electromagnetic

IMMUNITY – for all ME EQUIPMENT and ME SYSTEMS

Guidance and manufacturer’s declaration – electromagnetic immunity

The device is intended for use in the electromagnetic environment specied below.

The customer or the user of the device should assure that it is used in such an

environment

IMMUNITY test

Electrostatic

discharge

(ESD)

IEC 61000-4-2

Electrical fast

transient/burst

IEC 61000-4-4

Voltage dips,

short

interruptions

and voltage

variations on

power supply

input lines

IEC 61000-

4-11

Power

frequency

(50/60Hz)

magnetic eld

IEC 61000-4-8

3A/m 3A/m

±6 kV contact

±8 kV air

±2 kV for power

supply lines ±1 kV

for input/output

lines

<5% UT

(>95% dip in UT)

for 0.5 cycle

40% UT

(60% dip in UT )

for 5 cycles

70% UT

(30% dip in UT )

for 25 cycles

<5% UT

(>95% dip in UT )

for 5 s

<5% UT

(>95% dip in UT)

for 0.5 cycle

40% UT

(60% dip in UT )

for 5 cycles

70% UT

(30% dip in UT )

for 25 cycles

<5% UT

(>95% dip in UT )

for 5 s

±6 kV contact

±8 kV air

±2 kV line(s) to

line(s)

Floors should be wood,

concrete or ceramic tile. If

oors are covered with

synthetic material, the

relative humidity should be

at least 30%.

Mains power quality should

be that of a typical

commercial or hospital

environment.

Mains power quality should

be that of a typical

commercial or hospital

environment. If the user of

the device requires

continued operation during

power mains interruptions,

it is recommended that the

device be powered from an

uninterruptible power supply

or a battery.

Power frequency magnetic

elds should be at levels

characteristic of a typical

location in a typical

commercial or hospital

environment.

NOTE UT is the a.c. mains voltage prior to application of the test level.

IEC 60601 test level Compliance level

Electromagnetic

environment - guidance

1

We keep getting E1 on one person. The machine works for everyone else we try it on but on one person it just keeps coming up E1 cuff issue despite it having worked on her previously. We've repositioned the cuff, tried on each arm, tried different tightness to no avail. Has anyone got a solution pls? Submitted on 21-7-2023 at 12:27
Reply Report abuse
My Bo monitor gives E20 error. I checked everything but still error exists. I replaced all the 4 batteries, checked the cuffs, etc, but still error persists. Pls advise Submitted on 11-4-2022 at 16:51
Reply Report abuse
- My BP monitor BPM150 gives E20 error. I checked everything but still error exists. I replaced all the 4 batteries, checked the cuffs, etc, but still error persists. Pls advise. I have written email on 11th April, but till today no reply. DO u have repair centers in Mumbai, India?? Answered on 15-4-2022 at 18:00
  Vote up Report abuse
bpm 150 pressure monitor. page 19. I cannot read for very small lettering. How can I get a larger version.TA Submitted on 10-11-2021 at 14:14
Reply Report abuse
Can you delete individual readings or only all of them? Submitted on 13-7-2020 at 23:52
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

Register

Register getting emails for Duronic BPM150 at:

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Duronic BPM150 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 6,36 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info