612056
36
Zoom out
Zoom in
Previous page
1/52
Next page
Set-up instructions
34 Operating manual H867 Version 00.0 - Last updated: 01/2012
8.2 Removing the transport securing devices
All transport securing devices must be removed prior to set-up.
Remove the lashing straps and wooden blocks from the machine
upper section, the table and the frame.
Remove the supporting wedges between the machine arm and needle
plate.
8.3 Fitting the frame components
Figure 32: Fitting the frame components
Screw the cross bars (4) onto the frame bars (3).
Screw the oil can holder (8) at the rear to the upper cross bar (4).
Screw the cross strut (6) onto the foot struts (5).
Insert the inner bars (2) in such a way that the longer end of the head
section (1) is above the longer end of the foot struts (5).
Screw the inner bars (2) tight in such a way that both head sections (1)
have the same height.
Turn the adjusting screw (7) in such a way that the frame has even
contact with the ground.
8.4 Fitting the pedal
Figure 33: Fitting the pedal
Place the pedal (1) on the cross strut (2) and align it in such a way that
the middle of the pedal is subsequently under the needle.
Screw the pedal (1) firmly onto the cross strut (2).
q
q
i
w
w
e
e
r
r
t
t
y
u
(1) - Head sections of the
inner bars
(2) - Inner bars
(3) - Frame bars
(4) - Cross bars
(5) - Foot struts of the frame
(6) - Cross strut
(7) - Adjusting screw
(8) - Holder for the oil can
q
w
(1) - Pedal
(2) - Cross strut
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Durkopp Adler H867 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Durkopp Adler H867 in the language / languages: English as an attachment in your email.

The manual is 0,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Durkopp Adler H867

Durkopp Adler H867 User Manual - German - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info