612048
28
Zoom out
Zoom in
Previous page
1/36
Next page
6.3.2 Altering parameter values
A operator level parameter values are changed with the four program buttons ("
G
", "
F
",
"
+
", "
-
") on the right-hand side of the operating panel.
The parameter list on the next page gives all parameters which can be altered at
operator level.
1. Selecting programming mode
-
Turn on the main switch.
"
MANUAL
" appears in the display.
-
Press and hold down the "
G
" button.
-
Press the "
-
" button.
"
- - - - - - >F
" appears in the display.
-
Release both buttons.
The control unit is in programming mode.
NB:
The sewing drive is inoperative in programming mode.
2. Selecting parameter number
-
Press the "
G
" button.
The button must be pressed repeatedly until the group number (e.g. 6xx) appears.
-
Press the "
F
" button repeatedly until the required parameter number appears in
the display (e.g. "
102*0002
").
If the "
F
" button is held down the parameter number continues to change until it is
released.
3. Changing the displayed parameter value
-
-
Use the "
+
" and "
-
" buttons to increase or reduce the parameter value.
If the "
+
" or "
-
" button is held down the parameter number continues to change un-
til it is released.
-
If you leave the parameter-number routine the last-displayed parameter value is
automatically saved.
4. Leaving programming mode
-
Simultaneously press the "
G
" and "
-
" buttons.
The control unit leaves programming mode.
The last-displayed parameter value is saved.
-
"
MANUAL
" appears in the display.
-
The control unit is ready for use.
The new settings can be checked by executing a test seam.
30
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Durkopp Adler class 69 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Durkopp Adler class 69 in the language / languages: English as an attachment in your email.

The manual is 0,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info