Manual Durkopp Adler Beisler 1220-5 (page 53 of 69) (English)

457853

Zoom out

Zoom in

1/69

2.2.2 Distance between right hook and needle

Caution: Risk of injury!

Switch the main switch off.

Check and adjust the hook only with the sewing unit switched off.

Cross-line adjustment

Standard checking

When the right hook is in its top reverse point, the distance between

hook tip 9 and the middle of the needle should amount to 4.3 - 4.5 mm.

–

Screw off thread guides 1 and 3 as well as cover 2.

–

Move the hook in its top dead centre by handwheel.

–

Loosen screw 4 until the hook can just be pushed.

–

Shift the hook in such a way that the hook shank (1) is flush with

the right side of the hook holder.

–

Loosen screw 6 a little.

–

Turn lever 5 in such a way that there is a distance of 4.3 - 4.5 mm

between hook tip and the middle of the needle.

Take care that the bar 8 in the bearing 7 does not move too heavy.

–

Tighten screw 6.

Note

Do not yet tighten screw 4.

4,3 - 4,5 mm

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Durkopp Adler Beisler 1220-5 in the language / languages: English as an attachment in your email.

The manual is 2,09 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Durkopp Adler Beisler 1220-5 Manual

Product: