457853

Durkopp Adler Beisler 1220-5 Manual

45
Zoom out
Zoom in
Previous page
1/69
Next page
5. Pneu ma tic con nec ti on
For the operation of the pneumatic components the sewing unit has to
be provided with anhydrous compressed air.
ATTENTION!
For a trouble-free function of the pneumatic control processes the
compressed air net has to be rated as follows:
Even in the moment of maximum air consumption the minimum
operating pressure must not drop below 6 bar.
In case of a too high air pressure decrease:
–
Increase the compressor output.
–
Increase the diameter of the compressed air supply line.
Connecting the compressed air maintenance unit
–
Connect the connecting hose 3 to the compressed air net.
Setting the operating pressure
–
The operating pressure amounts to 6 bar.
It can be read off at the manometer 1.
–
For setting the operating pressure pull up and turn the rotary
handle 2.
- Turn in clockwise direction = increase the pressure
- Turn counter-clockwise = reduce the pressure
ATTENTION !
No oil-bearing compressed air must be fed from the compressed air net.
Behind the filter cleaned compressed air is withdrawn as blowing air
for cleaning machine parts and for blowing workpieces out.
Oil particles contained in the blowing air lead to malfunction and
stains on the workpieces.
7
2
3 2 1
… 45 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Durkopp Adler Beisler 1220-5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Durkopp Adler Beisler 1220-5 in the language / languages: English as an attachment in your email.

The manual is 2,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info