612049
33
Zoom out
Zoom in
Previous page
1/36
Next page
maintenance work explanation operating
to be carried out hours
Upper part of machine
- Remove lint, pieces of
thread and other debris.
Places in special need of cleaning:
- area under the needle plate
- feeder
- area around the shuttle
- bobbin housing
- needle-thread tensioner
- thread clipper (class 69-FA-373)
8
Sewing drive
- Check the condition and
tension
of the V-belt.
It must be possible to depress the V-belt
by about 10 mm by pressing on it with a
finger at its mid-point.
160
Compressed-air
maintenance
unit (optional extra)
- Check the water level in
the pressure regulator.
- Clean the filter insert.
The water level must not reach
the filter insert 2.
- After screwing in the drain plug 3 blast
the water out of the water separator
under pressure.
NB:
The water separator 2 is fitted with a
semi-automatic condensation drain.
Condensation is automatically drained
when the pressure falls below a pre-set
level.
Dirt and condensation are separated by
filter insert 1.
- Disconnect the machine from the
compressed-air supply.
- Screw in drain plug 3.
There must be no pressure in the
machine’s pneumatic system.
- Unscrew water separator 2.
- Unscrew filter insert 1
Wash the filter shell and insert
with cleaning fluid (
not
solvent)
and blast clean.
- Re-assemble and connect the
maintenance unit.
40
500
35
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Durkopp Adler b69 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Durkopp Adler b69 in the language / languages: English as an attachment in your email.

The manual is 0,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info