612059
38
Zoom out
Zoom in
Previous page
1/56
Next page
Operation
36
Operating Instructions 971 Version 00.0 - 03/2014
5.8.2 Lubricating
Lubricate the areas listed below after the time specified in the table at the
latest.
Use the DA-10 lubricant or an equivalent oil conforming to the following
specifications:
Viscosity at 40° C: 10 mm²/s
Flash point: 150° C
DA-10 can be obtained from DÜRKOPP ADLER AG sales offices.
Process Hours Comments
Sewing head
Check the oil level in the oil sump
40 If the oil in a machine that is not
running has fallen below the mid point
of the inspection glass, top up with oil
(DA-10).
Check the oil supply at the inspection
glass
40 Perform check on running machine
Cutting head
Check the oil level in the reservoir
8
Check the oil level in the plastic
container of the shearing head
8 There must always be oil in the
reservoir. Top up oil with grade DA-10
Check the oil flow rate to the head 500 Have this checked by a mechanic
Turntable and clamps
Lubricate the planet wheel
40 Have this done by a mechanic
Risk of injuries due to contact with oil.
Contact with oil can cause irritation, rashes,
allergies or skin injuries.
ALWAYS avoid long-term contact with oil.
ALWAYS thoroughly wash the affected areas
if contact with oil occurs.
WARNING
Danger to the environment
The handling and disposal of mineral oils is subject
to legally prescribed regulations.
Deliver the old oil to an authorized collection point.
Protect your environment, by taking care not to
spill any oil.
ATTENTION
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Durkopp Adler 971-01 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Durkopp Adler 971-01 in the language / languages: English as an attachment in your email.

The manual is 3,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Durkopp Adler 971-01

Durkopp Adler 971-01 User Manual - German - 56 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info