612064
32
Zoom out
Zoom in
Previous page
1/110
Next page
Operating
30
Operating manual 911 - Version 00.0 - 06/2013
5.8 Winding the looper thread
The separate winder allows the looper thread to be wound while sewing
or independently of sewing.
Figure 12: Winding the looper thread
Steps
1. Place the thread reel on the thread reel holder and guide the needle
thread through the hole in the guide on the unwinding bracket.
Important: The unwinding bracket must be parallel to the thread stand.
2. Insert the thread in a wavelike manner through the two rear holes of the
thread guide plate (1): From to to bottom through the rear hole and from
bottom to top through the left hole.
3. Feed the thread from top to bottom through the thread guide channel (2).
4. Guide the thread counterclockwise around the winding tensioner (3).
5. Insert the thread in a wavelike manner through the two remaining free
holes of the thread guide plate (1): From bottom to top through the rear
hole and from top to bottom through the front hole.
6. Feed the thread to the winder, clamp the thread behind the cutter (6)
and tear the thread off.
7. Plug an empty bobbin on the winding shaft (5) and turn clockwise until
it clicks into place.
8. Press the bobbin winder flap (4) against the bobbin.
The winder starts and stops automatically when the configured
bobbin filling volume is reached.
(Setting of the bobbin filling volume is described in the Service
manual.)
(1) - Thread guide plate
(2) - Thread guide channel
(3) - Thread winding tension
(4) - Winder flap
(5) - Winder shaft
(6) - Cutter
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Durkopp Adler 911-211 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Durkopp Adler 911-211 in the language / languages: English as an attachment in your email.

The manual is 13,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Durkopp Adler 911-211

Durkopp Adler 911-211 User Manual - German - 108 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info