612067
121
Zoom out
Zoom in
Previous page
1/140
Next page
Error and information messages
Operating instructions 906 - Version 00.0 - 05/2014
119
8 Error and information messages
8.1 Error messages
Error
code
Description Remedy
Sewing motor
1051 Sewing motor timeout
Cable to sewing motor reference
switch defective
Reference switch defective
Upper part does not move freely or
has excessive belt tension
Replace the cable
Replace the reference switch
Check the freedom of movement
and belt tension of the upper part
1052 Excessive sewing motor current
Sewing motor cable defective
Sewing motor defective
Controller defective
Replace the sewing motor cable
Replace the sewing motor
Replace the controller
1053 Sewing motor mains voltage too high Check the mains voltage
1055 Sewing motor overload
Sewing motor blocked/not moving
freely
Sewing motor defective
Controller defective
Remove the blockage/cause of lack
of freedom of movement
Check the sewing motor
Check the controller
1056 Sewing motor overtemperature
Sewing motor not moving freely
Sewing motor defective
Controller defective
Remove the cause of the lack of
freedom of motion
Replace the sewing motor
Replace the controller
1058
1302
1342
1344
Sewing motor speed
Sewing motor defective
Sewing motor error
Controller not receiving pulses from
pulse encoder in motor
Sewing motor error
Internal error
Replace the sewing motor
Check the cable from the pulse
encoder in the motor to the control-
ler
Switch the machine off and on again
Software update
Stepper motors
2101 X-axis stepper motor referencing time-
out
Faulty reference switch setting
Cable to reference switch defective
Reference switch defective
Adjust reference switch
Replace the cable
Check reference switch
2102 X-axis stepper motor current error
Stepper motor blocked
Encoder cable not connected or
defective
Encoder defective
Remove the blockage
Check/replace the encoder cable
Replace the stepper motor
2152 X-axis stepper motor overcurrent Replace the stepper motor
Replace the controller
121


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Durkopp Adler 906 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Durkopp Adler 906 in the language / languages: English as an attachment in your email.

The manual is 8,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Durkopp Adler 906

Durkopp Adler 906 User Manual - German - 140 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info