612068
4
Zoom out
Zoom in
Previous page
1/15
Next page
2. Operating Elements and Their Function
2.1 Elements at the Sewing Head
Element Function
1 Pressure foot screw - This screw is screwed in completely at the factory
and the position may not be changed.
2 Thread regulator - Setting the correct thread quantity for different
material thicknesses, sewing yarns and stitch lengths.
3 Control knob - Setting auxiliary tension for the needle thread.
4 Lever - Opening the main needle thread tension and
auxiliary needle thread tension.
5 Control knob - Setting the main tension for the needle thread
6 Lever - Switching the auxiliary tension on and off.
Pull the lever to the right before switching over in or-
der to free it from its catch.
7 Adjustment wheel - Setting the pressure foot stroke.
8 Lever - Bobbin thread winding device
9 Viewing glass with - Show the oil level in the reservoir.
11 fill opening The oil level must be kept above "MIN".
If necessary fill Esso "SP NK 10" up to the "MAX"
marking in the reservoir.
10 Control knob - Setting the stitch length for sewing forwards.
12 Control knob - Setting the stitch length for sewing in reverse.
13 Hand lever - Continuous adjustment of the stitch length between
the set forward and reverse stitch lengths.
14 Lever - Determining the status of the main needle thread
tension during pressure foot lift.
Lever up: Tension open.
Lever down: Tension closed.
15 Needle
Caution!
Be sure to turn off the main switch when threading or
replacing the needle.
Risk of Injury.
16 Knob - Arresting the pressure foot in the raised position.
6
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Durkopp Adler 8967 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Durkopp Adler 8967 in the language / languages: English as an attachment in your email.

The manual is 0,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Durkopp Adler 8967

Durkopp Adler 8967 User Manual - German - 16 pages

Durkopp Adler 8967 User Manual - French - 15 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info