612070
52
Zoom out
Zoom in
Previous page
1/68
Next page
6. Setting of positioning motor (drive)
The function of the positioning motor (drive) is defined by its program,
drive parameter setting, and the machine stopping positions. If the
machine is supplied in the disassembled condition, the drive setting
must be carried out by the purchaser. If the sewing machine is supplied
in assembled condition, the drive is already set by the sewing machine
manufacturer.
6.1 Setting of positioning motor (drive) parameters
The setting of the drive parameters is carried out in two steps. In the
first step, the parameters for the family of sewing machine class
groups are set by the function “autoselect“. In the second step, some
of the set parameters are changed to match the particular class.
6.1.1 Autoselect
The drive control system is equipped with the “autoselect“ device,
which is able to identify what sort of the sewing machine was
connected to the drive (with a connection cable). At the drive switching
on, the value of the resistance of the resistor located inside the sewing
machine head for this purpose is measured automatically. As a result
of this, the required parameter values are set automatically. If the
control system is not able to identify the valid resistance, the drive
control will run with so-called safety operation functions only to avoid
the sewing machine damage.
6.1.2 Setting of parameters
Caution!
Change of the parameter value must be performed with consideration
and in a responsible way. A false setting of the control may cause the
machine damage!
Warning!
By the so-called master-reset (see chapter 6.3) it is possible to
reset all parameter values back to the preset values again.
Parameter selection and value change:
By the keys +” and - the following or previous parameter is
selected.
By the keys "+" and - it is possible to enter the parameter number
directly.
Press the key E”. The value of the selected parameter is
displayed.
By the keys +” and - the parameter value is changed.
Press the key E”. The value of the following parameter is
displayed, or
press the key P - the same parameter is displayed.
20
52


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Durkopp Adler 887 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Durkopp Adler 887 in the language / languages: English as an attachment in your email.

The manual is 1,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Durkopp Adler 887

Durkopp Adler 887 User Manual - German - 70 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info