612073
15
Zoom out
Zoom in
Previous page
1/41
Next page
6 Operation
6.1 Threading the needle thread
Caution: danger of injury !
Tur n off the main switch.
The needle thread may only be threaded with the sewing machine
switched off.
Put the thread reel on the thread stand and lead the needle thread
through the unwinder arm.
The unwinder arm must be in vertical position above the thread
reels.
Thread in the thread through threading guide 1 and 2.
Conduct the thread clockwise around the pre-tensioner wheel 3.
Conduct the thread counter-clockwise around the supplementary
tensioner wheel 4.
Conduct the thread clockwise around the main tensioner wheel 5.
Pull the thread under neath the thread take-up spring 8 and
conduct it through the thread regulator 10 to the thread lever 11.
Conduct the thread through the thread lever 11 and the threading
guides 9, 7 and 6 on the needle bar.
Thread the thread into the needle eye.
Threading in the needle thread with double-needle machines
Put the thread reels on the thread stand and lead the needle
thread through the unwinder arm.
The unwinder arm must be in vertical position above the thread reels.
Thread for the left needle (as with single-needle machines)
Thread in the thread through threading guide 1 and 2.
Conduct the thread clockwise around the pre-tensioner 3.
Conduct the thread counter-clockwise around the supplementary
tensioner 4.
Conduct the thread clockwise around the main tensioner 5.
Pull the thread under neath the thread take-up spring 8 and
conduct it through the thread regulator 10 to the thread lever 11.
Conduct the tread through the upper bore hole of the thread
lever 11 and the threading guides 9, 7 and 6 on the needle bar.
Thread the thread into the needle eye.
Thread for the right needle
Thread in the thread through threading guide 12 and 13.
Conduct the thread clockwise around the pre-tensioner 14.
Conduct the thread counter-clockwise around the supplementary
tensioner 15.
Conduct the thread clockwise around the main tensioner 16.
Pull the thread under neath the thread take-up spring 19 and
conduct it through the thread regulator 21 to the thread lever 22.
Conduct the thread through the lower bore hole of the thread
lever 22 and the threading guides 20, 18 and 17 on the needle bar.
Thread the thread into the eye of the right needle.
13
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Durkopp Adler 868 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Durkopp Adler 868 in the language / languages: English as an attachment in your email.

The manual is 0,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Durkopp Adler 868

Durkopp Adler 868 User Manual - German - 41 pages

Durkopp Adler 868 User Manual - Spanish - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info