612078
54
Zoom out
Zoom in
Previous page
1/64
Next page
Installation
52
Operating Instructions 841 - 00.0 - 09/2014
7.8.2 Setting operating pressure
Figure 18: Setting operating pressure
1. Pull the adjustment knob (1) up.
2. Set the operating pressure so the pressure indicator (2) shows 6 bar:
To increase pressure: Turn the adjustment knob (1) clockwise.
To reduce pressure: Turn the adjustment knob (1) counterclockwise.
3. Push the adjustment knob (1) down.
7.9 Checking the lubrication
All wicks and felt bits of the upper section are soaked in oil at the factory.
This oil is conveyed to the reservoir during use. which is why you should
avoid filling too much oil during initial filling.
1. Checking the lubrication ( 5.12.2 Lubrication, page 31).
Adjusting the hook lubrication
To ensure reliable lubrication during infeed time, a relatively large amount
of oil is set at the factory.
1. Check the oil quantity and adjust this, if necessary.
ATTENTION
Machine damage possible due to incorrect pressure.
The operating pressure for the pneumatic unit is 6 bar.
Make sure that the operating pressure is set correctly before putting the
machine into operation.
0
2
8
4
6
10
w
q
(1) - Adjustment knob (2) - Pressure indicator
54


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Durkopp Adler 841 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Durkopp Adler 841 in the language / languages: English as an attachment in your email.

The manual is 3,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Durkopp Adler 841

Durkopp Adler 841 User Manual - German - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info