612086
23
Zoom out
Zoom in
Previous page
1/27
Next page
5.2 Bobbin Change
The specified value (number of button holes) is shown with the
numeric key "
2
".
The symbol at the left appears in the display.
Now a new value can be specified with the numeric keypad.
In order to reset the counter for the number of underthread stitches
to the specified or the set value, strike the enter key.
To exit leaving the display unchanged, strike the "ESC" key.
Winding the underthread
Select the symbol at the left with the arrow keys "×" and "Ø".
When this symbol is selected the screen at the left appears.
The sewing drive is started with the "
F2
" key.
The sewing drive is stopped with the "
F3
" key.
One returns to the main menu with the "
F1
" key.
5.3 Underthread Bobbin Empty
When the underthread counter has counted down to 0, the following
procedures are triggered:
When the underthread counter has counted down to 0 during the
sewing of the buttonhole facing, the advancing unit runs into the
right end position.
The "Underthread Bobbin Empty" symbol appears in the display.
The sewing procedure is interrupted.
Turn off switch 1 for the sewing machine head.
The "Secured Stop" symbol appears.
When the underthread bobbin is empty after the sewing of the last
buttonhole on the buttonhole facing, the material is stacked.
Caution Risk of Injury !
Change the bobbin only with the sewing machine head turned off.
Change the bobbin.
Turn on the switch for the sewing machine head.
The indicator at the left appears.
The set underthread capacity is shown.
If the underthread capacity is to be changed, enter the new value with
the numeric keypad and confirm with the enter key.
If the value for the underthread capacity is not to be changed,
strike the enter key.
The sewing procedure is continued.
1
25
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Durkopp Adler 841-27 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Durkopp Adler 841-27 in the language / languages: English as an attachment in your email.

The manual is 2,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Durkopp Adler 841-27

Durkopp Adler 841-27 User Manual - German - 27 pages

Durkopp Adler 841-27 User Manual - French - 27 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info