612089
110
Zoom out
Zoom in
Previous page
1/114
Next page
Glossary
108 Operating manual 806N Version 00.0 - 12/2012
10 Glossary
Term Explanation
Air suction The air suction is located in the sewing material support in
the edge folding area. The air suction fastens the basic part
to the sewing material support.
Basic part The basic part is the material product onto which the pocket
is to be sewn.
Basic position In the basic position the middle slide is at the rear and the
transfer plate is at the right.
Bobbin The hook thread is wound on the bobbin. The bobbin is
located under the sewing material support.
Edge folding Edge folding describes the process of folding the pocket
blank via the edge folding frame.
Edge folding frame The edge folding frame is used to fold the (edge) of the
pocket blank.
Edge folding set The edge folding set is defined as the inner frame and outer
frame of the edge folding frame.
Edge folding station The pocket blank is edge folded in the edge folding station.
Various buttons for operating the machine are also located
here 4.1.2 Edge folding station.
Equipotential bonding The equipotential bonding minimizes different electrical
potentials resulting from friction. This protects the machine
from damage and faulty behavior.
FA See thread cutter
Hook thread The hook thread is the thread coming from the bobbin. It is
located under the sewing material support.
Hose insert The hose insert is only important for the "Shirts/Underwear"
variant. It ensures that the folding of the pocket blank is
retained when the middle slide is removed after folding.
Middle slide The middle slide is a component of the edge folding station.
The pocket blank is placed on this.
Needle thread The needle thread is the thread coming from the thread reel.
It runs through the needle.
Pocket blank The pocket blank is the piece of material that is folded in the
edge folding station and then sewn as a pocket onto the
basic part.
Reference run In a reference run the machine senses the numeric code on
the transfer plate and checks the compatibility of the seam
program. The machine also searches for its starting point or
basic position.
Referencing The machine performs a reference run.
Safe stop When the machine is in the Safe stop mode the activities
listed in 5.8 Activities on the machine can be performed
without danger. Power is removed from the sewing motor
and the stepper motors are in the holding position.
110


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Durkopp Adler 806N at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Durkopp Adler 806N in the language / languages: English as an attachment in your email.

The manual is 2,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Durkopp Adler 806N

Durkopp Adler 806N User Manual - German - 114 pages

Durkopp Adler 806N User Manual - French - 114 pages

Durkopp Adler 806N User Manual - Spanish - 114 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info