612089
102
Zoom out
Zoom in
Previous page
1/114
Next page
Set-up instructions
100 Operating manual 806N Version 00.0 - 12/2012
Figure 68: Connection to the pneumatic system
Connect the compressed air as follows:
1. Connect the connection hose with the hose coupling to the com-
pressed air supply.
2. Plug the connection hose onto the hose neck of the pressure gage
and fasten with a hose clamp.
3. Open the shut-off valve by turning it to the right into the horizontal
position.
Setting the operating pressure
The operating pressure is 6 bar. This can be read on the pressure gage
(1).
To increase
pressure
Pull the twist grip (2) down and turn it clockwise until reaching a pressure
of 6 bar.
To reduce
pressure
Pull the rotary handle (2) down and turn it counter-clockwise until reaching
a pressure of 6 bar.
6.5.5 Topping up the oil
The procedure for topping up the oil in the sewing unit is described in
Section 5.11.2 Lubrication. The specifications for the oil to be used are
also listed below.
Use only DA10 sewing machine oil or an equivalent oil conforming to the
following specifications:
Viscosity at 40°C: 10 mm
2
/s
Flash point: >160°C
DA10 sewing machine oil can be obtained from Dürkopp Adler sales
offices under the following part numbers:
(1) - Pressure gage (2) - Twist grip
102


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Durkopp Adler 806N at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Durkopp Adler 806N in the language / languages: English as an attachment in your email.

The manual is 2,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Durkopp Adler 806N

Durkopp Adler 806N User Manual - German - 114 pages

Durkopp Adler 806N User Manual - French - 114 pages

Durkopp Adler 806N User Manual - Spanish - 114 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info