612089
96
Zoom out
Zoom in
Previous page
1/114
Next page
Set-up instructions
94 Operating manual 806N Version 00.0 - 12/2012
Above the table
level
The correct sequence for removing the covers above the table level is as
follows:
Cover (1) - Edge folding station
1. Remove the cover upwards while paying attention to the key panel
guide.
Cover (5) - Carriage
1. Place the cover on the carriage from above.
2. Fit the cover so that it lies on the edge folding station cover (1).
Cover (6) - Sewing head
1. Fit the cover into the guide at the upper right of the carriage (5) cover.
2. Fit the thread reel holder from above.
3. Tighten the clamping lever on the thread reel holder by reaching
under the cover.
4. Lock the cover lock using the associated key.
Below the table
level
The correct sequence for installing the covers below the table level is as
follows:
Cover (9) - Right side
1. Fit the cover downwards into the guide hooks.
2. Pull the cover upwards.
3. Fit the cover upwards into the guide hooks.
The cover is locked in place by the springs on the lower guide hooks.
4. Fit the plate.
5. Fasten the plate with the screws.
Cover (2) - Left side
1. Fit the cover downwards into the guide hooks.
2. Pull the cover upwards.
3. Fit the cover upwards into the guide hooks.
The cover is locked in place by the springs on the guide hooks.
4. Slide the retaining bar into the guide.
5. Fasten the screws on the retaining bar.
Cover (10) - Left and right rear
1. Fit the cover downwards into the guide hooks.
2. Pull the cover upwards.
3. Fit the cover upwards into the guide hooks.
The cover is locked in place by the springs on the guide hooks.
96


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Durkopp Adler 806N at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Durkopp Adler 806N in the language / languages: English as an attachment in your email.

The manual is 2,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Durkopp Adler 806N

Durkopp Adler 806N User Manual - German - 114 pages

Durkopp Adler 806N User Manual - French - 114 pages

Durkopp Adler 806N User Manual - Spanish - 114 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info